EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact of Annealing in Various Atmospheres on Characteristics of Tin-Doped Indium Oxide Layers towards Thermoelectric Applications

Anna Kaźmierczak-Bałata iD, Jerzy Bodzenta iD, Piotr Szperlich iD, Marcin Jesionek iD, Anna Michalewicz, Alina Domanowska iD, Jeyanthinath Mayandi, Vishnukanthan Venkatachalapathy iD, Andrej Kuznetsov iD

Materials · 20.09.2024 · 17 (18) · 4606

DOI: 10.3390/ma17184606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.09.2024. Verfasst von Anna Kaźmierczak-Bałata und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Physics-CSE, Silesian University of Technology, Konarskiego 22B, 44-100 Gliwice, Poland. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology, Research Council of Norway.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this work was to investigate the possibility of modifying the physical properties of indium tin oxide (ITO) layers by annealing them in different atmospheres and temperatures. Samples were annealed in vacuum, air, oxygen, nitrogen, carbon dioxide and a mixture of nitrogen with hydrogen (NHM) at temperatures from 200 °C to 400 °C. Annealing impact on the crystal structure, optical, electrical, thermal and thermoelectric properties was examined. It has been found from XRD measurements that for samples annealed in air, nitrogen and NHM at 400 °C, the In2O3/In4Sn3O12 share ratio decreased, resulting in a significant increase of the In4Sn3O12 phase. The annealing at the highest temperature in air and nitrogen resulted in larger grains and the mean grain size increase, while vacuum, NHM and carbon dioxide atmospheres caused the decrease in the mean grain size. The post-processing in vacuum and oxidizing atmospheres effected in a drop in optical bandgap and poor electrical properties. The carbon dioxide seems to be an optimal atmosphere to obtain good TE generator parameters—high ZT. The general conclusion is that annealing in different atmospheres allows for controlled changes in the structure and physical properties of ITO layers.

Schlagwörter

Stichwörter der Autor:innen

indium tin oxidepost-processingthermal conductivitythermoelectric parametersthin film

Autor:innen und Institutionen

  • Institute of Physics-CSE, Silesian University of Technology, Konarskiego 22B, 44-100 Gliwice, Poland.
  • Department of Materials Science, School of Chemistry, Madurai Kamaraj University, Madurai 625 021, India.
  • Department of Physics, University of Oslo, P.O. Box 1048 Blindern, NO-0316 Oslo, Norway.

ORCID-Profile: Anna Kaźmierczak-Bałata, Jerzy Bodzenta, Piotr Szperlich, Marcin Jesionek, Alina Domanowska, Vishnukanthan Venkatachalapathy, Andrej Kuznetsov

Förderung

  • Silesian University of Technology
  • Research Council of Norway

Zitieren

APA

Kaźmierczak-Bałata, A., Bodzenta, J., Szperlich, P., Jesionek, M., Michalewicz, A., Domanowska, A., Mayandi, J., Venkatachalapathy, V., & Kuznetsov, A. (2024). Impact of Annealing in Various Atmospheres on Characteristics of Tin-Doped Indium Oxide Layers towards Thermoelectric Applications. Materials, 17(18), 4606. https://doi.org/10.3390/ma17184606

Vancouver

Kaźmierczak-Bałata A, Bodzenta J, Szperlich P, Jesionek M, Michalewicz A, Domanowska A, et al. Impact of Annealing in Various Atmospheres on Characteristics of Tin-Doped Indium Oxide Layers towards Thermoelectric Applications. Materials. 2024;17(18):4606. doi:10.3390/ma17184606

BibTeX
@article{KamierczakBaata2024,
  author = {Kaźmierczak-Bałata, Anna and Bodzenta, Jerzy and Szperlich, Piotr and Jesionek, Marcin and Michalewicz, Anna and Domanowska, Alina and Mayandi, Jeyanthinath and Venkatachalapathy, Vishnukanthan and Kuznetsov, Andrej},
  title = {Impact of Annealing in Various Atmospheres on Characteristics of Tin-Doped Indium Oxide Layers towards Thermoelectric Applications},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {18},
  pages = {4606},
  doi = {10.3390/ma17184606}
}
Kostenlos starten →