EUVIMEDEUVIMED entdecken
Crossref

A Calibration Framework for Patient‐Specific 1D Arterial Models: Reflection‐Coefficient Pre‐Optimization, Coupled Conduit–Peripheral Compliance, and Exact Terminal Flow Distribution

Javier Murillo iD, Juan Mairal iD, Luis Sánchez-Fuster iD, Javier Orera iD

International Journal for Numerical Methods in Biomedical Engineering · 2026-11 · 42 (11)

DOI: 10.1002/cnm.70231 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 02.11.2026. Verfasst von Javier Murillo und 3 weiteren Autor:innen. Beteiligte Einrichtung: I3A and Fluid Mechanics Department, University of Zaragoza, Zaragoza, Spain. Hauptthemen laut MEDLINE: Arteries, Models, Cardiovascular. Die Arbeit nennt 56 Literaturangaben. Gefördert von: ERDF/EU, Spanish Ministry of Science, Innovation and Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accurate simulation of blood pressure and flow waveforms in patient‐specific 1D models requires precise calibration of numerous parameters, a task often complicated by limitations in clinical measurements and by heterogeneous modeling assumptions. This work proposes a comprehensive calibration methodology designed to ensure physiological consistency in the modeling of arterial networks across multiple spatial scales. The framework introduces a pre‐optimization strategy based on reflection coefficients to balance potential mismatches between measured inflow conditions, network topology, and pulse wave velocity distributions by quantifying their impact on reflections at terminal‐segment and junctions. A key component of the proposed approach is the combined calibration of conduit (1D) compliance and peripheral (0D) compliance, which are shown to be strongly coupled in realistic patient‐specific geometries and therefore cannot always be tuned independently to match pulse‐pressure targets. In parallel, we introduce a computational strategy to calibrate total and peripheral resistances so as to enforce an exact distribution of mean flow across all terminal segments while converging to target diastolic pressure. This exact enforcement of terminal flow fractions is vital to reliably compare and analyze the impact of alternative modeling hypotheses (friction/velocity‐profile assumptions, local versus averaged impedance, and pulse wave velocity formulations) without confounding effects due to residual flow‐distribution errors. The robustness of the proposed approach is demonstrated in four scenarios of increasing complexity, ranging from experimental hydraulic replicas to highly detailed systemic arterial trees. Overall, the method provides a versatile tool for developing reliable subject‐specific models. It enables a systematic assessment of how different factors, such as vascular topology, the balance between central and peripheral compliance, and the control of wave reflections, directly influence the accuracy of hemodynamic predictions.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

ArteriesModels, CardiovascularHumansCalibrationBlood PressurePulse Wave AnalysisComplianceComputer SimulationBlood Flow Velocity

Autor:innen und Institutionen

  • I3A and Fluid Mechanics Department, University of Zaragoza, Zaragoza, Spain.

ORCID-Profile: Javier Murillo, Juan Mairal, Luis Sánchez-Fuster, Javier Orera

Förderung

  • ERDF/EU
  • Spanish Ministry of Science, Innovation and Universities

Zitieren

APA

Murillo, J., Mairal, J., Sánchez-Fuster, L., & Orera, J. (2026). A Calibration Framework for Patient‐Specific 1D Arterial Models: Reflection‐Coefficient Pre‐Optimization, Coupled Conduit–Peripheral Compliance, and Exact Terminal Flow Distribution. International Journal for Numerical Methods in Biomedical Engineering, 42(11). https://doi.org/10.1002/cnm.70231

Vancouver

Murillo J, Mairal J, Sánchez-Fuster L, Orera J. A Calibration Framework for Patient‐Specific 1D Arterial Models: Reflection‐Coefficient Pre‐Optimization, Coupled Conduit–Peripheral Compliance, and Exact Terminal Flow Distribution. International Journal for Numerical Methods in Biomedical Engineering. 2026;42(11). doi:10.1002/cnm.70231

BibTeX
@article{Murillo2026,
  author = {Murillo, Javier and Mairal, Juan and Sánchez-Fuster, Luis and Orera, Javier},
  title = {A Calibration Framework for Patient‐Specific 1D Arterial Models: Reflection‐Coefficient Pre‐Optimization, Coupled Conduit–Peripheral Compliance, and Exact Terminal Flow Distribution},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2026},
  volume = {42},
  number = {11},
  doi = {10.1002/cnm.70231}
}
Infokarte | EUVIMED

Artikeldaten derzeit nicht verfügbar.

Recherche