EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Statistical Shape Modeling Approach for the Derivation of a Data‐Driven Geometry‐Aware Lumped Arterial Stenosis Model

P L J Hilhorst iD, S C F P M Verstraeten iD, K Zając iD, R Ganesan iD, M van 't Veer iD, F N van de Vosse iD, W Huberts iD

International Journal for Numerical Methods in Biomedical Engineering · 2026-02 · 42 (2)

DOI: 10.1002/cnm.70138 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 05.02.2026. Verfasst von P L J Hilhorst und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, the Netherlands. Hauptthemen laut MEDLINE: Coronary Stenosis, Models, Cardiovascular, Models, Statistical. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020 Research and Innovation Programme, Polish High-Performance Computing Infrastructure PLGrid (HPC Center: ACK Cyfronet AGH).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Existing lumped arterial stenosis models struggle to accurately capture the pressure and flow relationship of complex lesion morphologies, thereby limiting their ability to accurately evaluate lesions. To overcome these limitations, we introduce a geometry‐informed, data‐driven lumped stenosis model that incorporates realistic lesion shapes using statistical shape modeling (SSM). By generating a large dataset of synthetic coronary stenoses, hence focusing on epicardial lesions, and evaluating them through high‐fidelity 3D computational fluid dynamics (CFD), we derived reference pressure drops across a diverse range of lesion geometries and flow regimes. These CFD‐derived pressures and flows, along with their corresponding shape coefficients, were used to train a lumped parameter model capable of rapidly estimating trans‐lesional pressure drops. Remarkably, only five shape modes were necessary to effectively describe the geometric variability, underscoring the efficiency of the approach. Compared to a conventional lumped model, our approach significantly improved pressure drop prediction accuracy, especially in the case of irregular stenosis morphologies. Integration of the new data‐driven lumped stenosis model within a 1D pulse wave propagation framework was also successful, aligning simulated pressure and flow waveforms much closer with high‐fidelity CFD‐coupled results. In turn, the estimation of the fractional flow reserve, a clinically validated index of lesion‐specific ischemia, also improved by 18% compared to a conventional lumped model. Although only validated using synthetic lesion data, the model's architecture allows easy integration of additional shape features and lesion‐specific parameters, paving the way for future validation on patient‐derived geometries.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Coronary StenosisModels, CardiovascularModels, StatisticalHumansComputer SimulationConstriction, PathologicHydrodynamicsHemodynamics

Stichwörter der Autor:innen

computational fluid dynamicscoronary hemodynamicspressure drop predictionreduced‐order modelingstatistical shape modeling

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, the Netherlands.
  • Sano Centre for Computational Medicine, Kraków, Poland.
  • Department of Cardiology, Catharina Hospital, Eindhoven, the Netherlands.
  • Computational Science Lab, Faculty of Science, Institute for Informatics, University of Amsterdam, Amsterdam, the Netherlands.

ORCID-Profile: P L J Hilhorst, S C F P M Verstraeten, K Zając, R Ganesan, M van 't Veer, F N van de Vosse, W Huberts

Förderung

  • European Union's Horizon 2020 Research and Innovation Programme
  • Polish High-Performance Computing Infrastructure PLGrid (HPC Center: ACK Cyfronet AGH)

Zitieren

APA

Hilhorst, P. L. J., Verstraeten, S. C. F. P. M., Zając, K., Ganesan, R., van 't Veer, M., van de Vosse, F. N., & Huberts, W. (2026). A Statistical Shape Modeling Approach for the Derivation of a Data‐Driven Geometry‐Aware Lumped Arterial Stenosis Model. International Journal for Numerical Methods in Biomedical Engineering, 42(2). https://doi.org/10.1002/cnm.70138

Vancouver

Hilhorst PLJ, Verstraeten SCFPM, Zając K, Ganesan R, van 't Veer M, van de Vosse FN, et al. A Statistical Shape Modeling Approach for the Derivation of a Data‐Driven Geometry‐Aware Lumped Arterial Stenosis Model. International Journal for Numerical Methods in Biomedical Engineering. 2026;42(2). doi:10.1002/cnm.70138

BibTeX
@article{Hilhorst2026,
  author = {Hilhorst, P L J and Verstraeten, S C F P M and Zając, K and Ganesan, R and van 't Veer, M and van de Vosse, F N and Huberts, W},
  title = {A Statistical Shape Modeling Approach for the Derivation of a Data‐Driven Geometry‐Aware Lumped Arterial Stenosis Model},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2026},
  volume = {42},
  number = {2},
  doi = {10.1002/cnm.70138}
}
Kostenlos starten →