EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY 4.0

A Comparison of Coupling Strategies for 1D–3D Simulations of Coronary Hemodynamics

P L J Hilhorst iD, A J E Vermeer iD, K Zając iD, M van 't Veer iD, M Rezaeimoghaddam iD, F N van de Vosse iD, W Huberts iD

International Journal for Numerical Methods in Biomedical Engineering · 2025-12 · 41 (12)

DOI: 10.1002/cnm.70126 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 10.12.2025. Verfasst von P L J Hilhorst und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, the Netherlands. Hauptthemen laut MEDLINE: Hemodynamics, Models, Cardiovascular, Coronary Vessels, Coronary Circulation. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020 Research and Innovation Programme Through the Research and Innovation Actions "In Silico World: Lowering Barriers to Ubiquitous A…, Polish High-Performance Computing Infrastructure PLGrid (HPC Center: ACK Cyfronet AGH).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Noninvasive prediction of Fractional Flow Reserve (FFR) from imaging data through computational modeling has emerged as a promising alternative to invasive pressure measurements. Simulating coronary physiology, specifically coronary stenosis, poses a significant challenge due to the complex geometries of stenotic lesions and the need for physiologically realistic boundary conditions. Coupled 1D–3D modeling frameworks integrate a global one‐dimensional (1D) circulation model with localized three‐dimensional (3D) Computational Fluid Dynamics (CFD), enabling dynamic updates of boundary conditions and more accurate hemodynamic simulation. In this study, we couple a global 1D model of the coronary tree and partial systemic circulation with 3D CFD simulations using synthetically generated coronary stenosis geometries. We created three lesion types—symmetric, eccentric, and irregular—at severities of 50%, 70%, and 80%, to evaluate explicit coupling strategies for FFR prediction. We compare a steady‐state 3D simulation driven by mean flow from the transient 1D model with transient 3D simulations that exchange data continuously at every step or only at the end of the converged cardiac cycle. Applied to the synthetic stenotic geometries, all approaches predicted similar FFR values, while the steady‐state strategy achieved a significant reduction in computational cost, rendering it the most efficient for FFR prediction. Moreover, for irregular lesion geometries, localized 3D modeling revealed discrepancies in pressure loss compared to a simplified lumped model, demonstrating the added value of high‐fidelity 3D simulations in complex cases.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HemodynamicsModels, CardiovascularCoronary VesselsCoronary CirculationHumansComputer SimulationFractional Flow Reserve, MyocardialCoronary StenosisHydrodynamicsImaging, Three-Dimensional

Stichwörter der Autor:innen

computational fluid dynamicscoronary hemodynamicspatient‐specific modelingpulse‐wave propagation modelreduced‐order modeling

Autor:innen und Institutionen

  • Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, the Netherlands.
  • Department of Cardiology, Catharina Hospital, Eindhoven, the Netherlands.
  • Sano Centre for Computational Medicine, Kraków, Poland.
  • Computational Science Lab, Faculty of Science, Institute for Informatics, University of Amsterdam, Amsterdam, the Netherlands.

ORCID-Profile: P L J Hilhorst, A J E Vermeer, K Zając, M van 't Veer, M Rezaeimoghaddam, F N van de Vosse, W Huberts

Förderung

  • European Union's Horizon 2020 Research and Innovation Programme Through the Research and Innovation Actions "In Silico World: Lowering Barriers to Ubiquitous A…
  • Polish High-Performance Computing Infrastructure PLGrid (HPC Center: ACK Cyfronet AGH)

Zitieren

APA

Hilhorst, P. L. J., Vermeer, A. J. E., Zając, K., van 't Veer, M., Rezaeimoghaddam, M., van de Vosse, F. N., & Huberts, W. (2025). A Comparison of Coupling Strategies for 1D–3D Simulations of Coronary Hemodynamics. International Journal for Numerical Methods in Biomedical Engineering, 41(12). https://doi.org/10.1002/cnm.70126

Vancouver

Hilhorst PLJ, Vermeer AJE, Zając K, van 't Veer M, Rezaeimoghaddam M, van de Vosse FN, et al. A Comparison of Coupling Strategies for 1D–3D Simulations of Coronary Hemodynamics. International Journal for Numerical Methods in Biomedical Engineering. 2025;41(12). doi:10.1002/cnm.70126

BibTeX
@article{Hilhorst2025,
  author = {Hilhorst, P L J and Vermeer, A J E and Zając, K and van 't Veer, M and Rezaeimoghaddam, M and van de Vosse, F N and Huberts, W},
  title = {A Comparison of Coupling Strategies for 1D–3D Simulations of Coronary Hemodynamics},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2025},
  volume = {41},
  number = {12},
  doi = {10.1002/cnm.70126}
}
Kostenlos starten →