EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the Numerical Evaluation of Wall Shear Stress Using the Finite Element Method

Jana Brunátová iD, Jørgen S Dokken, Kristian Valen-Sendstad iD, Jaroslav Hron iD

International Journal for Numerical Methods in Biomedical Engineering · 2025-09 · 41 (9)

DOI: 10.1002/cnm.70086 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, online erschienen am 12.09.2025. Verfasst von Jana Brunátová und 3 weiteren Autor:innen. Beteiligte Einrichtung: Mathematical Institute, Charles University, Prague, Czechia. Hauptthemen laut MEDLINE: Finite Element Analysis, Stress, Mechanical, Models, Cardiovascular. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agentura Pro Zdravotnický Výzkum České Republiky, Grantová Agentura, Univerzita Karlova, Czech Health Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wall shear stress (WSS) is a crucial hemodynamic quantity extensively studied in cardiovascular research, yet its numerical computation is not straightforward. This work compares WSS results obtained from two different finite element discretizations, quantifies the differences between continuous and discontinuous stresses, and introduces a modified variationally consistent method for WSS evaluation through the formulation of a boundary‐flux problem. Two benchmark problems are considered: a 2D Stokes flow on a unit square and a 3D Poiseuille flow through a cylindrical pipe. These are followed by investigations of steady‐state Navier–Stokes flow in two image‐based, patient‐specific aneurysms. The study focuses on P1/P1 stabilized and Taylor–Hood P2/P1 mixed finite elements for velocity and pressure. WSS is computed using either the proposed boundary‐flux method or as a projection of tangential traction onto first order Lagrange (P1), discontinuous Galerkin first order (DG‐1), or discontinuous Galerkin zero order (DG‐0) space. For the P1/P1 stabilized element, the boundary‐flux and P1 projection methods yielded equivalent results. With the P2/P1 element, the boundary‐flux evaluation demonstrated faster convergence in the Poiseuille flow example but showed increased sensitivity to pressure field inaccuracies in image‐based geometries compared to the projection method. Furthermore, a paradoxical degradation in WSS accuracy was observed when combining the P2/P1 element with fine boundary‐layer meshes on a cylindrical geometry, an effect attributed to inherent geometric approximation errors. In aneurysm geometries, the P2/P1 element exhibited superior robustness to mesh size when evaluating average WSS and low shear area (LSA), outperforming the P1/P1 stabilized element. Projecting discontinuous finite element functions into continuous spaces can introduce artifacts, such as the Gibbs phenomenon. Consequently, it is crucial to carefully select the finite element space for boundary stress calculations, not only in applications involving WSS computations for aneurysms.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Finite Element AnalysisStress, MechanicalModels, CardiovascularHumansHemodynamicsBlood Flow VelocityComputer Simulation

Stichwörter der Autor:innen

Navier–Stokes equationsboundary‐flux evaluationfinite element methodstokes flowwall shear stress

Autor:innen und Institutionen

  • Mathematical Institute, Charles University, Prague, Czechia.
  • Bernoulli Institute, University of Groningen, Groningen, the Netherlands.
  • Numerical Analysis and Scientific Computing, Simula Research Laboratory, Oslo, Norway.
  • Computational Physiology, Simula Research Laboratory, Oslo, Norway.

ORCID-Profile: Jana Brunátová, Kristian Valen-Sendstad, Jaroslav Hron

Förderung

  • Agentura Pro Zdravotnický Výzkum České Republiky
  • Grantová Agentura, Univerzita Karlova
  • Czech Health Research Council
  • Charles University Grant Agency

Zitieren

APA

Brunátová, J., Dokken, J. S., Valen-Sendstad, K., & Hron, J. (2025). On the Numerical Evaluation of Wall Shear Stress Using the Finite Element Method. International Journal for Numerical Methods in Biomedical Engineering, 41(9). https://doi.org/10.1002/cnm.70086

Vancouver

Brunátová J, Dokken JS, Valen-Sendstad K, Hron J. On the Numerical Evaluation of Wall Shear Stress Using the Finite Element Method. International Journal for Numerical Methods in Biomedical Engineering. 2025;41(9). doi:10.1002/cnm.70086

BibTeX
@article{Bruntov2025,
  author = {Brunátová, Jana and Dokken, Jørgen S and Valen-Sendstad, Kristian and Hron, Jaroslav},
  title = {On the Numerical Evaluation of Wall Shear Stress Using the Finite Element Method},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2025},
  volume = {41},
  number = {9},
  doi = {10.1002/cnm.70086}
}
Kostenlos starten →