EUVIMEDEUVIMED entdecken
Crossref

Stem to prevent periprosthetic fracture after notching in total knee arthroplasty

Qian Wan iD, Aobo Zhang iD, Yang Liu, Hao Chen, Xue Zhao, Qing Han iD, Jincheng Wang iD

International Journal for Numerical Methods in Biomedical Engineering · 2024

DOI: 10.1002/cnm.3842 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, 2024. Verfasst von Qian Wan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics, The Second Hospital of Jilin University, Changchun, China. Hauptthemen laut MEDLINE: Arthroplasty, Replacement, Knee, Periprosthetic Fractures, Finite Element Analysis, Femur. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Department of Science and Technology of Jilin Province, People's Republic of China, Department of Finance in Jilin Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improper osteotomy during total knee arthroplasty (TKA) can lead to anterior femoral notching, which increases the risk of periprosthetic fractures due to stress concentration. One potential solution is the addition of an intramedullary stem to the femoral component. However, the optimal stem length remains unclear. In this study, we aimed to determine the optimal stem length using finite element models. Finite element models of femurs were developed with unstemmed prostheses and prostheses with stem lengths of 50, 75, and 100 mm. Under squat loading conditions, the von Mises stress at the notch and stress distribution on four transversal sections of the femur were analyzed. Additionally, micromotion of the prosthesis–bone interface was evaluated to assess initial stability. The unstemmed prosthesis exhibited a von Mises stress of 191.8 MPa at the notch, which decreased to 43.1, 8.8, and 23.5 MPa for stem lengths of 50, 75, and 100 mm, respectively. The stress reduction on four selected femoral transversal sections compared with the unstemmed prosthesis was 40.0%, 84.4%, and 67.1% for stem lengths of 50, 75, and 100 mm, respectively. Micromotion analysis showed a maximum of 118.8 μm for the unstemmed prosthesis, which decreased significantly with the application of stems, particularly at the anterior flange. Intramedullary stems effectively reduced stress concentration at the femoral notch. The 50‐mm stem length provided the optimal combination of reduced notch stress, minimized stress‐shielding effect, and decreased micromotion at the anterior flange.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Arthroplasty, Replacement, KneePeriprosthetic FracturesFinite Element AnalysisFemurHumansStress, MechanicalKnee ProsthesisProsthesis Design

Stichwörter der Autor:innen

aseptic looseningfinite element analysismicromotionnotchingperiprosthetic fracturetotal knee arthroplasty

Autor:innen und Institutionen

  • Department of Orthopedics, The Second Hospital of Jilin University, Changchun, China.
  • Department of Endocrinology and Metabolism, The First Hospital of Jilin University, Changchun, China.

ORCID-Profile: Qian Wan, Aobo Zhang, Qing Han, Jincheng Wang

Förderung

  • National Natural Science Foundation of China
  • Department of Science and Technology of Jilin Province, People's Republic of China
  • Department of Finance in Jilin Province
  • Interdisciplinary Integration and Cultivation Project of Jilin University
  • The Frist Hospital of Jilin University
  • The Central University Basic Scientific Research Fund
  • Department of Science and Technology of Jilin Province

Zitieren

APA

Wan, Q., Zhang, A., Liu, Y., Chen, H., Zhao, X., Han, Q., & Wang, J. (2024). Stem to prevent periprosthetic fracture after notching in total knee arthroplasty. International Journal for Numerical Methods in Biomedical Engineering. https://doi.org/10.1002/cnm.3842

Vancouver

Wan Q, Zhang A, Liu Y, Chen H, Zhao X, Han Q, et al. Stem to prevent periprosthetic fracture after notching in total knee arthroplasty. International Journal for Numerical Methods in Biomedical Engineering. 2024. doi:10.1002/cnm.3842

BibTeX
@article{Wan2024,
  author = {Wan, Qian and Zhang, Aobo and Liu, Yang and Chen, Hao and Zhao, Xue and Han, Qing and Wang, Jincheng},
  title = {Stem to prevent periprosthetic fracture after notching in total knee arthroplasty},
  journal = {International Journal for Numerical Methods in Biomedical Engineering},
  year = {2024},
  doi = {10.1002/cnm.3842}
}
Kostenlos starten →