The influence of bone model geometries on the determination of skull acoustic properties
International Journal for Numerical Methods in Biomedical Engineering · 2023
DOI: 10.1002/cnm.3779 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal for Numerical Methods in Biomedical Engineering, 2023. Verfasst von Joshua K Marchant und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics and Astronomy, University of Utah, Salt Lake City, Utah, USA. Hauptthemen laut MEDLINE: Skull, Acoustics. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei in PubMed Central verfügbar. Gefördert von: NIH HHS, NIBIB NIH HHS, Focused Ultrasound Foundation.
Abstract (Originalsprache)
In this study, we investigated the impact of various simulated skull bone geometries on the determination of skull speed of sound and acoustic attenuation values via optimization using transmitted pressure amplitudes beyond the bone. Using the hybrid angular spectrum method (HAS), we simulated ultrasound transmission through four model sets of different geometries involving sandwiched layers of diploë and cortical bone in addition to three models generated from CT images of ex‐vivo human skull‐bones. We characterized cost‐function solution spaces for each model and, using optimization, found that when a model possessed appreciable variations in resolvable layer thickness, the predefined attenuation coefficients could be found with low error (RMSE < 0.01 Np/cm). However, we identified a spatial frequency cutoff in the models' geometry beyond which the accuracy of the property determination begins to fail, depending on the frequency of the ultrasound source. There was a large increase in error of the attenuation coefficients determined by the optimization when the variations in layer thickness were above the identified spatial frequency cutoffs, or when the lateral variations across the model were relatively low in amplitude. For our limited sample of three CT‐image derived bone models, the attenuation coefficients were determined successfully. The speed of sound values were determined with low error for all models (including the CT‐image derived models) that were tested (RMSE < 0.4 m/s). These results illustrate that it is possible to determine the acoustic properties of two‐component models when the internal bone structure is taken into account and the structure satisfies the spatial frequency constraints discussed.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Physics and Astronomy, University of Utah, Salt Lake City, Utah, USA.
- Department of Biomedical Engineering, University of Utah, Salt Lake City, Utah, USA.
- Department of Radiology and Imaging Sciences, University of Utah, Salt Lake City, Utah, USA.
- Department of Electrical and Computer Engineering, University of Utah, Salt Lake City, Utah, USA.
Förderung
- NIH HHS
- NIBIB NIH HHS
- Focused Ultrasound Foundation
- Huntsman Cancer Institute, University of Utah
- National Institutes of Health
Zitieren
APA
Marchant, J. K., Clinard, S. R., Odéen, H., Parker, D. L., & Christensen, D. A. (2023). The influence of bone model geometries on the determination of skull acoustic properties. International Journal for Numerical Methods in Biomedical Engineering. https://doi.org/10.1002/cnm.3779
Vancouver
Marchant JK, Clinard SR, Odéen H, Parker DL, Christensen DA. The influence of bone model geometries on the determination of skull acoustic properties. International Journal for Numerical Methods in Biomedical Engineering. 2023. doi:10.1002/cnm.3779
BibTeX
@article{Marchant2023,
author = {Marchant, Joshua K and Clinard, Samuel R and Odéen, Henrik and Parker, Dennis L and Christensen, Douglas A},
title = {The influence of bone model geometries on the determination of skull acoustic properties},
journal = {International Journal for Numerical Methods in Biomedical Engineering},
year = {2023},
doi = {10.1002/cnm.3779}
}
EUVIMED