Bifunctionalization of Polypropylene via Melt Co‐Grafting Glycidyl Methacrylate and Ferulic Acid for Robust Aluminum Adhesion
Chemistry – A European Journal · 14.05.2026 · 32 (18)
DOI: 10.1002/chem.202503645 ↗Kurz gefasst
Fachartikel in der Zeitschrift Chemistry – A European Journal, online erschienen am 25.02.2026. Verfasst von Luyao Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Material, Chemistry and Chemical Engineering, Key Laboratory of Organosilicon Chemistry and Material Technology, Ministry of Education, Ha…. Die Arbeit nennt 41 Literaturangaben. Gefördert von: Hangzhou Normal University scientific research and innovation team project, High-Level Talents in Zhejiang Province, National Natural Science Foundation of China.
Abstract (Originalsprache)
The intrinsic low surface energy and weak polarity severely hinder the adhesion of polypropylene (PP) to metal substrates. Although grafting polar monomers onto the PP backbone improves interfacial adhesion, conventional reactive processing methods often suffer from low grafting efficiency, which limits adhesion performance. Herein, a bifunctionalization melt grafting strategy is proposed to simultaneously enhance grafting efficiency and interfacial adhesion by co‐grafting glycidyl methacrylate (GMA) and ferulic acid (FA), a natural phenolic compound, onto the PP backbone via reactive processing. Specifically, FA dramatically increases the GMA grafting degree to 5.4% at 1.5 wt% loading, a value nearly sevenfold higher than that of the FA‑free counterpart. The FA‐derived hydroxyl and carboxyl groups, together with the epoxy groups of GMA, establish strong physical and chemical interactions with aluminum (Al), as confirmed by x‑ray photoelectron spectroscopy. Consequently, the peel strength of the Al/PGF/Al laminated film reaches 2500 N/m, which is nearly 12 times higher than that of the FA‑free counterpart, with the interfacial failure shifted to a cohesive mode. This work demonstrates a sustainable and effective route to activate polyolefins for high‑performance metal adhesion through phenolic‑assisted interfacial design.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Material, Chemistry and Chemical Engineering, Key Laboratory of Organosilicon Chemistry and Material Technology, Ministry of Education, Hangzhou Normal University, Hangzhou, Zhejiang, People's Republic of Chi…
- School of Polymer Science and Polymer Engineering, The University of Akron, Akron, Ohio, USA.
- Zhejiang-South Africa Joint Laboratory of Sustainable Polymer Composite Materials and Technology, Hangzhou Normal University, Hangzhou, Zhejiang, People's Republic of China.
ORCID-Profile: Yongjin Li
Förderung
- Hangzhou Normal University scientific research and innovation team project
- High-Level Talents in Zhejiang Province
- National Natural Science Foundation of China
- Natural Science Foundation of Zhejiang Province
Zitieren
APA
Yang, L., Shentu, N., Liang, N., Wu, Y., Miyoshi, T., Zheng, X., & Li, Y. (2026). Bifunctionalization of Polypropylene via Melt Co‐Grafting Glycidyl Methacrylate and Ferulic Acid for Robust Aluminum Adhesion. Chemistry – A European Journal, 32(18). https://doi.org/10.1002/chem.202503645
Vancouver
Yang L, Shentu N, Liang N, Wu Y, Miyoshi T, Zheng X, et al. Bifunctionalization of Polypropylene via Melt Co‐Grafting Glycidyl Methacrylate and Ferulic Acid for Robust Aluminum Adhesion. Chemistry – A European Journal. 2026;32(18). doi:10.1002/chem.202503645
BibTeX
@article{Yang2026,
author = {Yang, Luyao and Shentu, Ning and Liang, Nanjie and Wu, Yujing and Miyoshi, Toshikazu and Zheng, Xin and Li, Yongjin},
title = {Bifunctionalization of Polypropylene via Melt Co‐Grafting Glycidyl Methacrylate and Ferulic Acid for Robust Aluminum Adhesion},
journal = {Chemistry – A European Journal},
year = {2026},
volume = {32},
number = {18},
doi = {10.1002/chem.202503645}
}
EUVIMED