EUVIMEDEUVIMED entdecken
Crossref

Adhesives Based on Poly(Glycidyl Methacrylate‐ co ‐Methyl Methacrylate): Curing Behavior and Adhesion Properties on Metal Substrates

Asim Olgun, Mesut Görür, Şahin Özel, Mehmet Tiritoğlu

Journal of Applied Polymer Science · 10.06.2026 · 143 (22)

DOI: 10.1002/app.70736 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 30.03.2026. Verfasst von Asim Olgun und 3 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, poly(glycidyl methacrylate) (PGMA) and poly(GMA‐ co ‐MMA) copolymers were synthesized using different monomer feed ratios. Composite adhesives based on PGMA and poly(GMA‐ co ‐MMA) were prepared by incorporating heat‐treated boric acid (HTB), heat‐treated ulexite (HTU), TiO 2 , and Fe 3 O 4 at concentrations of 1, 2, and 4 wt%. The polymers were characterized by FTIR and 1 H NMR. Thermogravimetric analysis (TGA) was employed to assess the thermal stability of the synthesized polymers and confirm the filler content of their adhesive formulations. Furthermore, the influence of filler concentration on the shear strength of single‐lap joints bonded with PGMA and poly(GMA‐ co ‐MMA) adhesives was systematically investigated using aluminum adherends. The addition of fillers to the polymer matrix improved thermal stability and increased single‐lap shear strength, indicating enhanced adhesive performance. The incorporation of TiO 2 and Fe 3 O 4 into poly(GMA‐ co ‐MMA) copolymer adhesive formulations yielded very similar maximum shear strengths, 421.03 and 420.15 N, respectively. The addition of HTU strongly increased the maximum shear strength to 1064.5 N. The highest value of 1884.12 N was obtained with the inclusion of HTB in the adhesive matrix, attributed to the polar interactions between HTB and the functional groups of the polymeric structure and the aluminum surface.

Zitieren

APA

Olgun, A., Görür, M., Özel, Ş., & Tiritoğlu, M. (2026). Adhesives Based on Poly(Glycidyl Methacrylate‐ co ‐Methyl Methacrylate): Curing Behavior and Adhesion Properties on Metal Substrates. Journal of Applied Polymer Science, 143(22). https://doi.org/10.1002/app.70736

Vancouver

Olgun A, Görür M, Özel Ş, Tiritoğlu M. Adhesives Based on Poly(Glycidyl Methacrylate‐ co ‐Methyl Methacrylate): Curing Behavior and Adhesion Properties on Metal Substrates. Journal of Applied Polymer Science. 2026;143(22). doi:10.1002/app.70736

BibTeX
@article{Olgun2026,
  author = {Olgun, Asim and Görür, Mesut and Özel, Şahin and Tiritoğlu, Mehmet},
  title = {Adhesives Based on Poly(Glycidyl Methacrylate‐ co ‐Methyl Methacrylate): Curing Behavior and Adhesion Properties on Metal Substrates},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {22},
  doi = {10.1002/app.70736}
}
Kostenlos starten →