EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Partial safety factor calibration for finite element design of steel and steel‐concrete composite bridge girder sections

Stefan Martinolli, Andreas Taras

ce/papers · 2026-09 · 9 (2-3) · 2938-2944

DOI: 10.1002/cepa.70731 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Stefan Martinolli und 1 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In accordance with the framework established in EN 1993‐1‐14, a direct design resistance check of steel structures evaluated by finite element analysis is permitted by selecting the partial safety factors derived for analytical resistance functions. However, given that finite element models demonstrate a different behaviour with regard to both the accuracy of resistance prediction and sensitivity to the scatter of material and geometric parameters, the direct application of the previously developed resistance‐sided partial safety factors needs to be reconsidered. The objective of this paper is to implement the principles outlined in EN 1990 and to derive a consistent partial safety factor for the design of finite element models of plated steel girders and furthermore expand the application to steel‐concrete composite plated girders. The study proposes probabilistic random variables describing the model uncertainty of finite element models, thus enabling the evaluation of partial safety factors. These factors demonstrate that the currently proposed values are in a similar – though not necessarily conservative – range. Furthermore, a number of recommendations are proposed for the purpose of enhancing the consistency of safety calibration in finite element models.

Zitieren

APA

Martinolli, S., & Taras, A. (2026). Partial safety factor calibration for finite element design of steel and steel‐concrete composite bridge girder sections. ce/papers, 9(2-3), 2938-2944. https://doi.org/10.1002/cepa.70731

Vancouver

Martinolli S, Taras A. Partial safety factor calibration for finite element design of steel and steel‐concrete composite bridge girder sections. ce/papers. 2026;9(2-3):2938-2944. doi:10.1002/cepa.70731

BibTeX
@article{Martinolli2026,
  author = {Martinolli, Stefan and Taras, Andreas},
  title = {Partial safety factor calibration for finite element design of steel and steel‐concrete composite bridge girder sections},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {2938--2944},
  doi = {10.1002/cepa.70731}
}
Kostenlos starten →