EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on the Force Mechanism of Internal Composite Connectors in Steel–Concrete Composite Sections of Bridge Towers

Yunwei Du, Zhenqing Yu, Yuyang Chen, Niujing Ma, Ronghui Wang

Buildings · 29.06.2025 · 15 (13) · 2284

DOI: 10.3390/buildings15132284 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Buildings, online erschienen am 29.06.2025. Verfasst von Yunwei Du und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Yunwei Du.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current research on the stress mechanisms of composite connectors within steel–concrete structures of bridge towers is sparse, and there is a lack of established experimental methods and finite element modeling techniques for studying these mechanisms. This study focuses on a specific type of composite shear connector within the steel–concrete section of the Shunde Bridge tower. By employing proposed experimental methods and finite element model analysis, this research examines the load–slip curves and stress distribution of these shear connectors. It aims to elucidate the stress mechanisms and mechanical relationships between the composite connectors and the individual perforated plate connectors and shear stud connectors that comprise them. The results demonstrate that the proposed experimental methods and finite element modeling approaches effectively analyze the stress mechanisms of composite connectors, revealing that the ultimate load-bearing capacity and elastic stiffness of the composite connectors are approximately the sum of those of the individual connectors configured in parallel; The mechanical performance of the composite connectors in the steel–concrete section of the bridge tower is approximately the additive sum of the mechanical performances of the individual connectors comprising them. By comparing the experimentally measured load–slip curves with those calculated from the finite element models, it validates the modeling approach of the finite element model, and the material parameters established through material characteristic tests and literature review are reasonable.

Förderung

  • National Natural Science Foundation of China
  • Yunwei Du

Zitieren

APA

Du, Y., Yu, Z., Chen, Y., Ma, N., & Wang, R. (2025). Experimental Study on the Force Mechanism of Internal Composite Connectors in Steel–Concrete Composite Sections of Bridge Towers. Buildings, 15(13), 2284. https://doi.org/10.3390/buildings15132284

Vancouver

Du Y, Yu Z, Chen Y, Ma N, Wang R. Experimental Study on the Force Mechanism of Internal Composite Connectors in Steel–Concrete Composite Sections of Bridge Towers. Buildings. 2025;15(13):2284. doi:10.3390/buildings15132284

BibTeX
@article{Du2025,
  author = {Du, Yunwei and Yu, Zhenqing and Chen, Yuyang and Ma, Niujing and Wang, Ronghui},
  title = {Experimental Study on the Force Mechanism of Internal Composite Connectors in Steel–Concrete Composite Sections of Bridge Towers},
  journal = {Buildings},
  year = {2025},
  volume = {15},
  number = {13},
  pages = {2284},
  doi = {10.3390/buildings15132284}
}
Kostenlos starten →