Experimental testing of passing‐through circular hollow section column‐splice connections
ce/papers · 2026-09 · 9 (2-3) · 1640-1645
DOI: 10.1002/cepa.70445 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Rajarshi Das und 2 weiteren Autor:innen. Die Arbeit nennt 7 Literaturangaben.
Abstract (Originalsprache)
Circular Hollow Section (CHS) columns are widely used in modern construction due to their high resistance to axial, tensile, and bending loads in all directions, as well as their architectural appeal. However, conventional end plate ‐ bolted splice connections often reduce structural efficiency by concentrating damage in the bolts and are frequently considered visually intrusive. To address these drawbacks, the EU‐RFCS project LASTTS developed an innovative laser‐cut “passing‐through” concept that enhances both the structural performance and the aesthetics of a splice connection. This study examines three configurations: (1) CS‐1, where CHS columns are connected using fully inserted passing‐through steel plates, bolts, and steel cover plates positioned outside the tube diameter; (2) CS‐2, using partially inserted passing‐through steel plates, bolts, and steel cover plates placed inside the tube diameter; and (3) CS‐3, featuring partially inserted passing‐through steel plates, bolts, and steel end plates located inside the tube diameter. An experimental program comprising full‐scale specimens is carried out at the ACB2 laboratory of UHasselt under monotonic tensile and four‐point monotonic bending loads. This paper presents the specimen design, test setup, instrumentation, force–displacement behavior, moment‐rotation response, and strain development, while comparing the structural behavior of the three configurations based on the experimental results.
Zitieren
APA
Das, R., Dragan, D., & Degee, H. (2026). Experimental testing of passing‐through circular hollow section column‐splice connections. ce/papers, 9(2-3), 1640-1645. https://doi.org/10.1002/cepa.70445
Vancouver
Das R, Dragan D, Degee H. Experimental testing of passing‐through circular hollow section column‐splice connections. ce/papers. 2026;9(2-3):1640-1645. doi:10.1002/cepa.70445
BibTeX
@article{Das2026,
author = {Das, Rajarshi and Dragan, Dan and Degee, Herve},
title = {Experimental testing of passing‐through circular hollow section column‐splice connections},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1640--1645},
doi = {10.1002/cepa.70445}
}
EUVIMED