EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Seismic Behavior of Flange-Web Welded Plate Connections in Tubular and Concrete-Filled Columns Using Finite Element Analysis

Freddy Patricio Moncayo-Matute, Diego Fernando Chicaiza-Machuca, Israel Santiago Vélez-Sisalima, Paúl Bolívar Torres-Jara, Efrén Vázquez-Silva

Applied Sciences · 25.07.2024 · 14 (15) · 6494

DOI: 10.3390/app14156494 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 25.07.2024. Verfasst von Freddy Patricio Moncayo-Matute und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Salesian Polytechnic University, Cuenca, Ecuador.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The present study analyzes the behavior of connections with flange-web welded plates using the finite element method in tubular columns filled with concrete, and beam, type I. An analytical study of the structural dynamic behavior of a Special Moment Frame (SMF) was carried out, in 5 levels, with HEB structural profiles, for IPE-type columns and beams, according to the requirements established by the AISC-360-16, ANSI-341 standards, and the Ecuadorian standard NEC-2015. The design process of the special frame structure was validated with the help of specialized software. Subsequently, the structural profiles were replaced following the actual construction situation in Ecuador. 3D models of the structural system and the elements of metallic connections were obtained for evaluation through the analysis of finite elements. These models were subjected to virtual tests according to the AISC 341-16 protocols and FEMA 350 standards. The evaluation of the connections showed that they did not meet the flexural strength criterion at 0.04 rad, but they exceeded 80% of the plastic moment at 0.02 rad. Thus, flange-web welded plate connections can be valid for intermediate moment frames (IMF) in areas with moderate seismicity. In addition, it was observed that the columns filled with concrete optimize the structural elements in terms of dimensions; but do not contribute significantly to soldered connections due to the later development of plastic ball joints.

Förderung

  • The Salesian Polytechnic University, Cuenca, Ecuador

Zitieren

APA

Moncayo-Matute, F. P., Chicaiza-Machuca, D. F., Vélez-Sisalima, I. S., Torres-Jara, P. B., & Vázquez-Silva, E. (2024). Seismic Behavior of Flange-Web Welded Plate Connections in Tubular and Concrete-Filled Columns Using Finite Element Analysis. Applied Sciences, 14(15), 6494. https://doi.org/10.3390/app14156494

Vancouver

Moncayo-Matute FP, Chicaiza-Machuca DF, Vélez-Sisalima IS, Torres-Jara PB, Vázquez-Silva E. Seismic Behavior of Flange-Web Welded Plate Connections in Tubular and Concrete-Filled Columns Using Finite Element Analysis. Applied Sciences. 2024;14(15):6494. doi:10.3390/app14156494

BibTeX
@article{MoncayoMatute2024,
  author = {Moncayo-Matute, Freddy Patricio and Chicaiza-Machuca, Diego Fernando and Vélez-Sisalima, Israel Santiago and Torres-Jara, Paúl Bolívar and Vázquez-Silva, Efrén},
  title = {Seismic Behavior of Flange-Web Welded Plate Connections in Tubular and Concrete-Filled Columns Using Finite Element Analysis},
  journal = {Applied Sciences},
  year = {2024},
  volume = {14},
  number = {15},
  pages = {6494},
  doi = {10.3390/app14156494}
}
Kostenlos starten →