Determination of fracture toughness J C in existing structures using small specimens
ce/papers · 2026-09 · 9 (2-3) · 61-67
DOI: 10.1002/cepa.70379 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Sjors van Es und 1 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben.
Abstract (Originalsprache)
Existing structures may be reassessed for various reasons, such as lifetime extension, change of loading or reuse. For existing structures, the steel quality is unknown in many cases, and material certificates are usually not available. Therefore, fracture toughness properties are generally unknown. On the other hand, a change in loads or the aim for lifetime extension may create a need for advanced crack growth calculations where accurate values of these parameters are required. The J C SENB specimen tests are highly standardized and require multiple tests, each with a relatively large test specimen. Therefore a large material sample is required. Moreover, this sample is required from the area of the structure which should be reassessed. Utilisation and fatigue damage is expected to be high in these locations and taking such a sample may therefore not be acceptable. This paper presents a J C SENB testing method using a small quantity of material, which is extracted by drilling a M39 bolt hole. For this to be possible, additional material is welded to the extracted material. The proposed welding procedure is shown to not influence the extracted material sample through hardness tests and microstructure evaluation. By means of comparison of J C SENB fracture toughness tests, the validity of the proposed method is proven. The presented research is a continuation of the development of the testing on small specimens. The method was earlier proven to give excellent results for static material properties ( f y , f u ). With the extension in the current paper, the method provides the possibility to determine the most relevant material properties for the assessment of existing structures.
Zitieren
APA
Es, S. V., & Slot, H. (2026). Determination of fracture toughness J C in existing structures using small specimens. ce/papers, 9(2-3), 61-67. https://doi.org/10.1002/cepa.70379
Vancouver
Es SV, Slot H. Determination of fracture toughness J C in existing structures using small specimens. ce/papers. 2026;9(2-3):61-67. doi:10.1002/cepa.70379
BibTeX
@article{Es2026,
author = {Es, Sjors van and Slot, Henk},
title = {Determination of fracture toughness J C in existing structures using small specimens},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {61--67},
doi = {10.1002/cepa.70379}
}
EUVIMED