EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Inverse Stepped Beam Method for Bending Stiffness Estimation of Modular Buildings

Hollie Moore, John Hickey, Brian Broderick, Breiffni Fitzgerald

ce/papers · 2026-09 · 9 (2-3) · 879-886

DOI: 10.1002/cepa.70350 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Hollie Moore und 3 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of volumetric modular construction techniques in high‐rise buildings is a relatively novel concept. As this composite form of construction continues to be employed in increasingly taller structures the wind‐induced vibration response becomes a significant design consideration. Evaluating the vibration response of a structure during the design process relies on knowledge of the inherent properties of the structure such as the mass, stiffness and damping ratio. The mass of a structure can be calculated with a reasonable accuracy from FE models. However, assessing the stiffness and damping ratio of a modular building through modelling can be difficult due to the number of elements, lateral stability system and bespoke connections involved. Furthermore, there has been limited research including in‐situ monitoring of modular structures resulting in uncertainty around the stiffness and inherent damping ratio. At present, high‐rise modular buildings with RC cores are often designed ignoring the stiffness contribution of the modules and solely considering the stiffness of the RC core. This is a conservative design approach. However, the volumetric modules do contribute to the stiffness of the completed building. This research uses natural frequencies calculated from full‐scale measurements of Europe's two tallest volumetric modular buildings, Ten Degrees and College Road , at different stages of completion to quantify the stiffness contribution of the volumetric modules to the global bending stiffness of the completed structure. An Inverse Stepped Beam Method is employed to calculate the bending stiffness of the structure at different points during construction. The results show that the modules increase the bending stiffness of the studied buildings. This finding enables more informed design and enhanced assessment of the wind‐induced vibration response of high‐rise modular structures.

Zitieren

APA

Moore, H., Hickey, J., Broderick, B., & Fitzgerald, B. (2026). An Inverse Stepped Beam Method for Bending Stiffness Estimation of Modular Buildings. ce/papers, 9(2-3), 879-886. https://doi.org/10.1002/cepa.70350

Vancouver

Moore H, Hickey J, Broderick B, Fitzgerald B. An Inverse Stepped Beam Method for Bending Stiffness Estimation of Modular Buildings. ce/papers. 2026;9(2-3):879-886. doi:10.1002/cepa.70350

BibTeX
@article{Moore2026,
  author = {Moore, Hollie and Hickey, John and Broderick, Brian and Fitzgerald, Breiffni},
  title = {An Inverse Stepped Beam Method for Bending Stiffness Estimation of Modular Buildings},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {879--886},
  doi = {10.1002/cepa.70350}
}
Kostenlos starten →