Yielding behavior of friction‐type bolted joint with combining staggered and grid arrangements
ce/papers · 2026-09 · 9 (2-3) · 1811-1816
DOI: 10.1002/cepa.70304 ↗Kurz gefasst
Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Kazuha Ashiya und 2 weiteren Autor:innen. Die Arbeit nennt 4 Literaturangaben.
Abstract (Originalsprache)
In Japan, friction‐type high‐strength bolted joints with a turreted arrangement combining staggered and grid layouts are widely used in tension regions. This configuration increases the net cross‐sectional area by reducing the number of bolts toward the joint end. Under the current Japanese Specifications for Highway Bridges, the net‐section yield resistance is evaluated as for conventional staggered joints, assuming uniform bolt load sharing; moreover, current practice allows a 10% increase in yield resistance by accounting for friction. However, the actual load‐transfer mechanism and yielding behaviour of turreted joints remain unclear. This study performed finite element analyses for six cases with three bolt arrangements under both slip‐critical and yield‐critical conditions. In the elastic range, the outermost bolt row carried most of the applied load. At yielding, frictional load sharing was non‐uniform in the yield‐critical type, indicating that bolt arrangement should be reflected in design. Yielding was governed by either the yield band from the tip bolt's hole and an edge‐side surface or the yield band along outermost bolts to an edge‐side surface. The ratio of the yield load from analysis to design yield resistance ranged from 0.91 to 0.97, indicating that a uniform 10% friction‐based increase is inappropriate.
Zitieren
APA
Ashiya, K., Sakura, R., & Yamaguchi, T. (2026). Yielding behavior of friction‐type bolted joint with combining staggered and grid arrangements. ce/papers, 9(2-3), 1811-1816. https://doi.org/10.1002/cepa.70304
Vancouver
Ashiya K, Sakura R, Yamaguchi T. Yielding behavior of friction‐type bolted joint with combining staggered and grid arrangements. ce/papers. 2026;9(2-3):1811-1816. doi:10.1002/cepa.70304
BibTeX
@article{Ashiya2026,
author = {Ashiya, Kazuha and Sakura, Ryo and Yamaguchi, Takashi},
title = {Yielding behavior of friction‐type bolted joint with combining staggered and grid arrangements},
journal = {ce/papers},
year = {2026},
volume = {9},
number = {2-3},
pages = {1811--1816},
doi = {10.1002/cepa.70304}
}
EUVIMED