EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Coating Li 3 PO 4 on Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 Achieving Lithium Dendrites Inhibition and High Chemical Stability

Jun Ma, Ruilin He, Yidong Jiang, Ludan Zhang, Hongli Xu, Hongbo Zeng, Chaoyang Wang, Xiaoxiong Xu, Yonghong Deng, Jun Wang, Shang‐Sen Chi

Battery Energy · 2025-07 · 4 (4)

DOI: 10.1002/bte2.70009 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Battery Energy, online erschienen am 08.07.2025. Verfasst von Jun Ma und 10 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid‐state electrolyte (SSE) is a potential way to solve the safety problems of lithium metal batteries (LMBs), and Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 (LLZTO) is one of the most extensive research SSEs due to its good air stability and wide electrochemical window. However, the residual alkali on LLZTO surface limits its application with polyvinylidene difluoride (PVDF)‐contained binders, and the uncontrollable lithium dendrites growing between the grain boundaries of LLZTO particles would lead to rapid capacity fading and potential short circuit risk. Herein, by in situ coating Li 3 PO 4 (LPO) on LLZTO particles (LLZTO@LPO) evenly, the residual alkali on the LLZTO surface is neutralized and the pH value is reduced to 8.84. The modified LLZTO can be mixed with PVDF solution and shows good fluidity without a cross‐linking reaction, making the subsequent ceramic coating on the separator feasible. The LLZTO@LPO coating polyethylene (PE) separator can achieve 1400 h (115% increase) stable cycling under 1 mA cm −2 current density in the Li∥Li symmetrical cell and 80% capacity retention after 260 cycles (NCM622‐Li coin cell with 3 mAh cm −2 loading). Furthermore, the LLZTO SSE pellets were prepared with the LLZTO@LPO and assembled in coin cell. The critical current density (CCD) result increases from 0.7 to 1.6 mA cm −2 owing to that the LPO coating effectively inhibits the lithium dendrites formation through LLZTO grain boundaries. This work provides a strategy for fabricating the coating layer on LLZTO to improve the stability of LMBs.

Zitieren

APA

Ma, J., He, R., Jiang, Y., Zhang, L., Xu, H., Zeng, H., Wang, C., Xu, X., Deng, Y., Wang, J., & Chi, S. (2025). In Situ Coating Li 3 PO 4 on Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 Achieving Lithium Dendrites Inhibition and High Chemical Stability. Battery Energy, 4(4). https://doi.org/10.1002/bte2.70009

Vancouver

Ma J, He R, Jiang Y, Zhang L, Xu H, Zeng H, et al. In Situ Coating Li 3 PO 4 on Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 Achieving Lithium Dendrites Inhibition and High Chemical Stability. Battery Energy. 2025;4(4). doi:10.1002/bte2.70009

BibTeX
@article{Ma2025,
  author = {Ma, Jun and He, Ruilin and Jiang, Yidong and Zhang, Ludan and Xu, Hongli and Zeng, Hongbo and Wang, Chaoyang and Xu, Xiaoxiong and Deng, Yonghong and Wang, Jun and Chi, Shang‐Sen},
  title = {In Situ Coating Li 3 PO 4 on Li 6.5 La 3 Zr 1.5 Ta 0.5 O 12 Achieving Lithium Dendrites Inhibition and High Chemical Stability},
  journal = {Battery Energy},
  year = {2025},
  volume = {4},
  number = {4},
  doi = {10.1002/bte2.70009}
}
Kostenlos starten →