Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling
Biotechnology and Bioengineering · 2026-09 · 123 (9) · 2389-2405
DOI: 10.1002/bit.70266 ↗At a glance
Journal article in Biotechnology and Bioengineering, published online on 2026-06-11. Written by Ana G Del Hierro and 3 co-authors. Institution: School of Chemical and Bioprocess Engineering, University College Dublin, Belfield, Dublin, Ireland. Major MEDLINE topics: Biomass, Fermentation, Yarrowia, Kluyveromyces. Cited 2 times so far (Crossref); 46 references. The full text is freely available (open access, CC BY 4.0). Funded by: European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie, H2020 Marie Skłodowska-Curie Actions.
Abstract (original language)
Accurate biomass monitoring remains a bottleneck in industrial fermentation, where conventional offline methods, gravimetric dry cell weight (DCW) and spectrophotometric optical density at 600 nm (OD 600 ), are incompatible with real‐time process control. Online optical probes operating at 860 nm (OD 860 ) provide continuous, non‐invasive monitoring, but their signals become increasingly nonlinear due to multiple light scattering, limiting direct interpretation without mathematical transformation. This study develops and validates interpretable soft sensor regression models that convert nonlinear OD 860 signals into DCW and OD 600 across three industrially relevant yeast species, Pichia pastoris , Kluyveromyces marxianus , and Yarrowia lipolytica . Fed‐batch datasets from 19 independent batches were used to evaluate 14 candidate models, including nonlinear and spline‐based functions. Model performance was assessed by the nested leave‐one‐batch‐out cross‐validation (LOBO‐CV) to prevent information leakage from batch‐correlated data. Model selection followed a parsimony criterion, retaining the simplest model within 5% of the minimum cross‐validated RMSE. For DCW prediction, selected models achieved cross‐validated coefficients of determination ( R 2 ) of 0.85–0.91 across species; OD 600 predictions were less accurate ( R 2 CV = 0.49 – 0.90), reflecting dilution‐driven noise amplification inherent to high‐density spectrophotometric measurements. A dual‐model strategy is presented, pairing software‐optimized implementations with simplified piecewise‐linear equations suitable for calculator‐based deployment in industrial environments.
Subjects
MeSH terms (MEDLINE)
Author keywords
Authors and institutions
- School of Chemical and Bioprocess Engineering, University College Dublin, Belfield, Dublin, Ireland.
- BiOrbic, Research Ireland Centre for Bioeconomy, Dublin, Ireland.
- Bioprocessing R&D Department, Bionet, Parque Tecnológico Fuente Álamo, Fuente Álamo, Spain.
- R&D Department, Probelte SAU - Agronova Biotech, Molina de Segura, Spain.
ORCID profiles: Ana G Del Hierro, José Luis Checa-Barrera, Juan A Moreno-Cid, Eoin Casey
Funding
- European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie
- H2020 Marie Skłodowska-Curie Actions
Cite
APA
Del Hierro, A. G., Checa-Barrera, J. L., Moreno-Cid, J. A., & Casey, E. (2026). Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling. Biotechnology and Bioengineering, 123(9), 2389-2405. https://doi.org/10.1002/bit.70266
Vancouver
Del Hierro AG, Checa-Barrera JL, Moreno-Cid JA, Casey E. Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling. Biotechnology and Bioengineering. 2026;123(9):2389-2405. doi:10.1002/bit.70266
BibTeX
@article{DelHierro2026,
author = {Del Hierro, Ana G and Checa-Barrera, José Luis and Moreno-Cid, Juan A and Casey, Eoin},
title = {Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling},
journal = {Biotechnology and Bioengineering},
year = {2026},
volume = {123},
number = {9},
pages = {2389--2405},
doi = {10.1002/bit.70266}
}
EUVIMED