Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling
Biotechnology and Bioengineering · 2026-09 · 123 (9) · 2389-2405
DOI: 10.1002/bit.70266 ↗Kurz gefasst
Fachartikel in der Zeitschrift Biotechnology and Bioengineering, online erschienen am 11.06.2026. Verfasst von Ana G Del Hierro und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical and Bioprocess Engineering, University College Dublin, Belfield, Dublin, Ireland. Hauptthemen laut MEDLINE: Biomass, Fermentation, Yarrowia, Kluyveromyces. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie, H2020 Marie Skłodowska-Curie Actions.
Abstract (Originalsprache)
Accurate biomass monitoring remains a bottleneck in industrial fermentation, where conventional offline methods, gravimetric dry cell weight (DCW) and spectrophotometric optical density at 600 nm (OD 600 ), are incompatible with real‐time process control. Online optical probes operating at 860 nm (OD 860 ) provide continuous, non‐invasive monitoring, but their signals become increasingly nonlinear due to multiple light scattering, limiting direct interpretation without mathematical transformation. This study develops and validates interpretable soft sensor regression models that convert nonlinear OD 860 signals into DCW and OD 600 across three industrially relevant yeast species, Pichia pastoris , Kluyveromyces marxianus , and Yarrowia lipolytica . Fed‐batch datasets from 19 independent batches were used to evaluate 14 candidate models, including nonlinear and spline‐based functions. Model performance was assessed by the nested leave‐one‐batch‐out cross‐validation (LOBO‐CV) to prevent information leakage from batch‐correlated data. Model selection followed a parsimony criterion, retaining the simplest model within 5% of the minimum cross‐validated RMSE. For DCW prediction, selected models achieved cross‐validated coefficients of determination ( R 2 ) of 0.85–0.91 across species; OD 600 predictions were less accurate ( R 2 CV = 0.49 – 0.90), reflecting dilution‐driven noise amplification inherent to high‐density spectrophotometric measurements. A dual‐model strategy is presented, pairing software‐optimized implementations with simplified piecewise‐linear equations suitable for calculator‐based deployment in industrial environments.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical and Bioprocess Engineering, University College Dublin, Belfield, Dublin, Ireland.
- BiOrbic, Research Ireland Centre for Bioeconomy, Dublin, Ireland.
- Bioprocessing R&D Department, Bionet, Parque Tecnológico Fuente Álamo, Fuente Álamo, Spain.
- R&D Department, Probelte SAU - Agronova Biotech, Molina de Segura, Spain.
ORCID-Profile: Ana G Del Hierro, José Luis Checa-Barrera, Juan A Moreno-Cid, Eoin Casey
Förderung
- European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie
- H2020 Marie Skłodowska-Curie Actions
Zitieren
APA
Del Hierro, A. G., Checa-Barrera, J. L., Moreno-Cid, J. A., & Casey, E. (2026). Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling. Biotechnology and Bioengineering, 123(9), 2389-2405. https://doi.org/10.1002/bit.70266
Vancouver
Del Hierro AG, Checa-Barrera JL, Moreno-Cid JA, Casey E. Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling. Biotechnology and Bioengineering. 2026;123(9):2389-2405. doi:10.1002/bit.70266
BibTeX
@article{DelHierro2026,
author = {Del Hierro, Ana G and Checa-Barrera, José Luis and Moreno-Cid, Juan A and Casey, Eoin},
title = {Real‐Time Biomass Estimation in High‐Density Yeast Fermentations Using Soft Sensor Modeling},
journal = {Biotechnology and Bioengineering},
year = {2026},
volume = {123},
number = {9},
pages = {2389--2405},
doi = {10.1002/bit.70266}
}
EUVIMED