EUVIMEDObjevte EUVIMED
Systematische Übersicht

3D‐Printed Scaffolds for Cranial Bone Regeneration: A Systematic Review of Design, Materials, and Computational Optimization

Elnaz Khorasani iD, Bahman Vahidi iD

Biotechnology and Bioengineering · 2025-08 · 122 (8) · 1982-2008

DOI: 10.1002/bit.28994 ↗

At a glance

Systematische Übersicht in Biotechnology and Bioengineering, published online on 2025-04-27. Written by Elnaz Khorasani and 1 co-authors. Institution: Department of Medical Technology and Tissue Engineering, Faculty of Life Science Engineering, School of Interdisciplinary Science and Technology, Uni…. Major MEDLINE topics: Printing, Three-Dimensional, Bone Regeneration, Tissue Scaffolds, Skull. Cited 18 times so far (Crossref); 281 references. Funded by: The authors received no specific funding for this work..

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Cranial bone defects from trauma, congenital conditions, or surgery are challenging to treat due to the skull's limited regeneration. Traditional methods like autografts and allografts have drawbacks, including donor site issues and poor integration. 3D‐printed scaffolds provide a patient‐specific alternative, improving bone regeneration and integration. This review evaluates advancements in 3D‐printed scaffolds for cranial bone regeneration, focusing on fabrication techniques, material innovations, and structural optimization while assessing their preclinical and clinical potential. A systematic literature search (2014–2024) was conducted using PubMed and other databases. Studies addressing scaffold properties such as porosity, pore interconnectivity, and mechanical stability were included, while non‐cranial scaffold studies were excluded. Advances in 3D printing have enabled patient‐specific scaffolds with optimized architecture to enhance bone regeneration, mechanical support, and nutrient transport. Bioceramics, polymers, and composites mimic native bone properties, while bioactive coatings further improve osteogenesis. However, limited clinical translation and insufficient customization remain challenges. Further preclinical and clinical trials are crucial to overcoming barriers in mechanical optimization and patient‐specific scaffold fabrication, bridging the gap between research and clinical applications.

Subjects

MeSH terms (MEDLINE)

Printing, Three-DimensionalBone RegenerationTissue ScaffoldsSkullHumansAnimalsTissue EngineeringBiocompatible Materials

Author keywords

additive manufacturingbiomaterialscraniofacial bone regenerationmechanical propertiesscaffold optimization

Substances

Biocompatible Materials

Authors and institutions

  • Department of Medical Technology and Tissue Engineering, Faculty of Life Science Engineering, School of Interdisciplinary Science and Technology, University of Tehran, Tehran, Iran.

ORCID profiles: Elnaz Khorasani, Bahman Vahidi

Funding

  • The authors received no specific funding for this work.

Cite

APA

Khorasani, E., & Vahidi, B. (2025). 3D‐Printed Scaffolds for Cranial Bone Regeneration: A Systematic Review of Design, Materials, and Computational Optimization. Biotechnology and Bioengineering, 122(8), 1982-2008. https://doi.org/10.1002/bit.28994

Vancouver

Khorasani E, Vahidi B. 3D‐Printed Scaffolds for Cranial Bone Regeneration: A Systematic Review of Design, Materials, and Computational Optimization. Biotechnology and Bioengineering. 2025;122(8):1982-2008. doi:10.1002/bit.28994

BibTeX
@article{Khorasani2025,
  author = {Khorasani, Elnaz and Vahidi, Bahman},
  title = {3D‐Printed Scaffolds for Cranial Bone Regeneration: A Systematic Review of Design, Materials, and Computational Optimization},
  journal = {Biotechnology and Bioengineering},
  year = {2025},
  volume = {122},
  number = {8},
  pages = {1982--2008},
  doi = {10.1002/bit.28994}
}
Start for free →