Oxygen Consumption in Filamentous Pellets of Aspergillus niger : Microelectrode Measurements and Modeling
Biotechnology and Bioengineering · 2025-02 · 122 (2) · 306-321
DOI: 10.1002/bit.28874 ↗At a glance
Journal article in Biotechnology and Bioengineering, published online on 2024-11-04. Written by Charlotte Deffur and 6 co-authors. Institution: School of Life Sciences Weihenstephan, Chair of Process Systems Engineering, Technical University of Munich, Freising, Germany. Major MEDLINE topics: Aspergillus niger, Microelectrodes, Oxygen. Cited 12 times so far (Crossref); 44 references. The full text is freely available (open access, CC BY 4.0). Funded by: The authors thank the Deutsche Forschungsgemeinschaft for financial support for this study within the SPP 1934 DiSPBiotech (315384307 and 315305620) and SPP217…, Deutsche Forschungsgemeinschaft.
Abstract (original language)
Filamentous fungi cultivated as biopellets are well established in biotechnology industries. A distinctive feature of filamentous fungi is that hyphal growth and fungal morphology affect product titers and require tailored process conditions. Within the pellet, mass transfer, substrate consumption, and biomass formation are intricately linked to the local hyphal fraction and pellet size. This study combined oxygen concentration measurements with microelectrode profiling and three‐dimensional X‐ray microtomography measurements of the same fungal pellets for the first time. This allowed for the precise correlation of micromorphological information with local oxygen concentrations of two Aspergillus niger strains (hyperbranching and regular branching). The generated results showed that the identified oxygen‐penetrated outer pellet regions exhibited a depth of 90–290 µm, strain‐specific, with the active part percentage in the pellet ranging from 18% to 69%, without any difference between strains. Using a 1D continuum diffusion consumption model, the oxygen concentration in the pellets was computed depending on the local hyphal fraction. The best simulation results were achieved by individually estimating the oxygen‐related biomass yield coefficient of the consumption term within each examined pellet, with an average estimated value of 1.95 (± 0.72) kg biomass per kg oxygen. The study lays the foundation for understanding oxygen supply in fungal pellets and optimizing processes and pellet morphologies accordingly.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- School of Life Sciences Weihenstephan, Chair of Process Systems Engineering, Technical University of Munich, Freising, Germany.
- Institute of Biochemical Engineering, Technische Universität Braunschweig, Braunschweig, Germany.
- Center of Pharmaceutical Engineering, Technische Universität Braunschweig, Braunschweig, Germany.
ORCID profiles: Charlotte Deffur, Anna Dinius, Julian Pagel, Henri Müller, Stefan Schmideder, Heiko Briesen, Rainer Krull
Funding
- The authors thank the Deutsche Forschungsgemeinschaft for financial support for this study within the SPP 1934 DiSPBiotech (315384307 and 315305620) and SPP217…
- Deutsche Forschungsgemeinschaft
Cite
APA
Deffur, C., Dinius, A., Pagel, J., Müller, H., Schmideder, S., Briesen, H., & Krull, R. (2025). Oxygen Consumption in Filamentous Pellets of Aspergillus niger : Microelectrode Measurements and Modeling. Biotechnology and Bioengineering, 122(2), 306-321. https://doi.org/10.1002/bit.28874
Vancouver
Deffur C, Dinius A, Pagel J, Müller H, Schmideder S, Briesen H, et al. Oxygen Consumption in Filamentous Pellets of Aspergillus niger : Microelectrode Measurements and Modeling. Biotechnology and Bioengineering. 2025;122(2):306-321. doi:10.1002/bit.28874
BibTeX
@article{Deffur2025,
author = {Deffur, Charlotte and Dinius, Anna and Pagel, Julian and Müller, Henri and Schmideder, Stefan and Briesen, Heiko and Krull, Rainer},
title = {Oxygen Consumption in Filamentous Pellets of Aspergillus niger : Microelectrode Measurements and Modeling},
journal = {Biotechnology and Bioengineering},
year = {2025},
volume = {122},
number = {2},
pages = {306--321},
doi = {10.1002/bit.28874}
}
EUVIMED