EUVIMEDOpdag EUVIMED
Crossref

Establishment of low‐cost production platforms of polyhydroxyalkanoate bioplastics from Halomonas cupida J9

Siqi Wang, Yujie Liu, Hongfu Guo, Yan Meng, Weini Xiong, Ruihua Liu, Chao Yang

Biotechnology and Bioengineering · 2024-07 · 121 (7) · 2106-2120

DOI: 10.1002/bit.28694 ↗

At a glance

Journal article in Biotechnology and Bioengineering, published online on 2024-04-08. Written by Siqi Wang and 6 co-authors. Institution: Key Laboratory of Molecular Microbiology and Technology for Ministry of Education, College of Life Sciences, Nankai University, Tianjin, China. Major MEDLINE topics: Polyhydroxyalkanoates, Metabolic Engineering, Halomonas. Cited 28 times so far (Crossref); 53 references. Funded by: National Key R&D Program of China, National Natural Science Foundation of China, 2022 NCC Fund Project.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Microbial production of polyhydroxyalkanoate (PHA) is greatly restricted by high production cost arising from high‐temperature sterilization and expensive carbon sources. In this study, a low‐cost PHA production platform was established from Halomonas cupida J9. First, a marker‐less genome‐editing system was developed in H. cupida J9. Subsequently, H. cupida J9 was engineered to efficiently utilize xylose for PHA biosynthesis by introducing a new xylose metabolism module and blocking xylonate production. The engineered strain J9UΔ xylD ‐P8 xylA has the highest PHA yield (2.81 g/L) obtained by Halomonas with xylose as the sole carbon source so far. This is the first report on the production of short‐ and medium‐chain‐length (SCL‐ co ‐MCL) PHA from xylose by Halomonas . Interestingly, J9UΔ xylD ‐P8 xylA was capable of efficiently utilizing glucose and xylose as co‐carbon sources for PHA production. Furthermore, fed‐batch fermentation of J9UΔ xylD ‐P8 xylA coupled to a glucose/xylose co‐feeding strategy reached up to 12.57 g/L PHA in a 5‐L bioreactor under open and unsterile condition. Utilization of corn straw hydrolysate as the carbon source by J9UΔ xylD ‐P8 xylA reached 7.0 g/L cell dry weight (CDW) and 2.45 g/L PHA in an open fermentation. In summary, unsterile production in combination with inexpensive feedstock highlights the potential of the engineered strain for the low‐cost production of PHA from lignocellulose‐rich agriculture waste.

Subjects

MeSH terms (MEDLINE)

PolyhydroxyalkanoatesMetabolic EngineeringHalomonasXyloseFermentationBioreactors

Author keywords

Halomonas cupidalignocellulosepolyhydroxyalkanoatexylose

Substances

PolyhydroxyalkanoatesXylose

Authors and institutions

  • Key Laboratory of Molecular Microbiology and Technology for Ministry of Education, College of Life Sciences, Nankai University, Tianjin, China.
  • Department of Biochemistry and Molecular Biology, College of Life Sciences, Nankai University, Tianjin, China.

Funding

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • 2022 NCC Fund Project

Cite

APA

Wang, S., Liu, Y., Guo, H., Meng, Y., Xiong, W., Liu, R., & Yang, C. (2024). Establishment of low‐cost production platforms of polyhydroxyalkanoate bioplastics from Halomonas cupida J9. Biotechnology and Bioengineering, 121(7), 2106-2120. https://doi.org/10.1002/bit.28694

Vancouver

Wang S, Liu Y, Guo H, Meng Y, Xiong W, Liu R, et al. Establishment of low‐cost production platforms of polyhydroxyalkanoate bioplastics from Halomonas cupida J9. Biotechnology and Bioengineering. 2024;121(7):2106-2120. doi:10.1002/bit.28694

BibTeX
@article{Wang2024,
  author = {Wang, Siqi and Liu, Yujie and Guo, Hongfu and Meng, Yan and Xiong, Weini and Liu, Ruihua and Yang, Chao},
  title = {Establishment of low‐cost production platforms of polyhydroxyalkanoate bioplastics from Halomonas cupida J9},
  journal = {Biotechnology and Bioengineering},
  year = {2024},
  volume = {121},
  number = {7},
  pages = {2106--2120},
  doi = {10.1002/bit.28694}
}
Start for free →