EUVIMEDScopri EUVIMED
Open access · CC BY 4.0

Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles

Pauli Losoi iD, Jukka Konttinen, Ville Santala

Biotechnology and Bioengineering · 2024

DOI: 10.1002/bit.28635 ↗

At a glance

Journal article in Biotechnology and Bioengineering, 2024. Written by Pauli Losoi and 2 co-authors. Institution: Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland. Major MEDLINE topics: Carbon Dioxide, Oxygen. Cited 8 times so far (Crossref); 48 references. The full text is freely available (open access, CC BY 4.0). Funded by: Tampere University of Technology Graduate School, Novo Nordisk Foundation.

AbstractSubjectsDati bibliograficiCiteRelated studies

Abstract (original language)

Large‐scale fermentation processes involve complex dynamic interactions between mixing, reaction, mass transfer, and the suspended biomass. Empirical correlations or case‐specific computational simulations are usually used to predict and estimate the performance of large‐scale bioreactors based on data acquired at bench scale. In this two‐part‐study, one‐dimensional axial diffusion equations were studied as a general and predictive model of large‐scale bioreactors. This second part focused on typical fed‐batch operations where substrate gradients are known to occur, and characterized the profiles of substrate, pH, oxygen, carbon dioxide, and temperature. The physically grounded steady‐state axial diffusion equations with first‐ and zeroth‐order kinetics yielded analytical solutions to the relevant variables. The results were compared with large‐scale Escherichia coli and Saccharomyces cerevisiae experiments and simulations from the literature, and good agreement was found in substrate profiles. The analytical profiles obtained for dissolved oxygen, temperature, pH, and were also consistent with the available data. Distribution functions for the substrate were defined, and efficiency factors for biomass growth and oxygen uptake rate were derived. In conclusion, this study demonstrated that axial diffusion equations can be used to model the effects of mixing and reaction on the relevant variables of typical large‐scale fed‐batch fermentations.

Subjects

MeSH terms (MEDLINE)

Carbon DioxideOxygenTemperatureBioreactorsFermentationBiomassSaccharomyces cerevisiaeEscherichia coliHydrogen-Ion Concentration

Author keywords

bioreactordiffusion equationfed batchmodelingreactor controlscale-up

Substances

Carbon DioxideOxygen

Authors and institutions

  • Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland.

ORCID profiles: Pauli Losoi

Funding

  • Tampere University of Technology Graduate School
  • Novo Nordisk Foundation

Cite

APA

Losoi, P., Konttinen, J., & Santala, V. (2024). Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles. Biotechnology and Bioengineering. https://doi.org/10.1002/bit.28635

Vancouver

Losoi P, Konttinen J, Santala V. Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles. Biotechnology and Bioengineering. 2024. doi:10.1002/bit.28635

BibTeX
@article{Losoi2024,
  author = {Losoi, Pauli and Konttinen, Jukka and Santala, Ville},
  title = {Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles},
  journal = {Biotechnology and Bioengineering},
  year = {2024},
  doi = {10.1002/bit.28635}
}
Start for free →