EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles

Pauli Losoi iD, Jukka Konttinen, Ville Santala

Biotechnology and Bioengineering · 2024

DOI: 10.1002/bit.28635 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biotechnology and Bioengineering, 2024. Verfasst von Pauli Losoi und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland. Hauptthemen laut MEDLINE: Carbon Dioxide, Oxygen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tampere University of Technology Graduate School, Novo Nordisk Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Large‐scale fermentation processes involve complex dynamic interactions between mixing, reaction, mass transfer, and the suspended biomass. Empirical correlations or case‐specific computational simulations are usually used to predict and estimate the performance of large‐scale bioreactors based on data acquired at bench scale. In this two‐part‐study, one‐dimensional axial diffusion equations were studied as a general and predictive model of large‐scale bioreactors. This second part focused on typical fed‐batch operations where substrate gradients are known to occur, and characterized the profiles of substrate, pH, oxygen, carbon dioxide, and temperature. The physically grounded steady‐state axial diffusion equations with first‐ and zeroth‐order kinetics yielded analytical solutions to the relevant variables. The results were compared with large‐scale Escherichia coli and Saccharomyces cerevisiae experiments and simulations from the literature, and good agreement was found in substrate profiles. The analytical profiles obtained for dissolved oxygen, temperature, pH, and were also consistent with the available data. Distribution functions for the substrate were defined, and efficiency factors for biomass growth and oxygen uptake rate were derived. In conclusion, this study demonstrated that axial diffusion equations can be used to model the effects of mixing and reaction on the relevant variables of typical large‐scale fed‐batch fermentations.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Carbon DioxideOxygenTemperatureBioreactorsFermentationBiomassSaccharomyces cerevisiaeEscherichia coliHydrogen-Ion Concentration

Stichwörter der Autor:innen

bioreactordiffusion equationfed batchmodelingreactor controlscale-up

Substanzen

Carbon DioxideOxygen

Autor:innen und Institutionen

  • Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland.

ORCID-Profile: Pauli Losoi

Förderung

  • Tampere University of Technology Graduate School
  • Novo Nordisk Foundation

Zitieren

APA

Losoi, P., Konttinen, J., & Santala, V. (2024). Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles. Biotechnology and Bioengineering. https://doi.org/10.1002/bit.28635

Vancouver

Losoi P, Konttinen J, Santala V. Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles. Biotechnology and Bioengineering. 2024. doi:10.1002/bit.28635

BibTeX
@article{Losoi2024,
  author = {Losoi, Pauli and Konttinen, Jukka and Santala, Ville},
  title = {Modeling large‐scale bioreactors with diffusion equations. Part II: Characterizing substrate, oxygen, temperature, carbon dioxide, and pH profiles},
  journal = {Biotechnology and Bioengineering},
  year = {2024},
  doi = {10.1002/bit.28635}
}
Kostenlos starten →