EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the Activation Energy for Pyrolytic Degradation of Poly‐L‐Lactide ( PLA ) During Artificially Accelerated Aging

Margarita Reit iD, Natalie Krug, Jan-Christoph Zarges, Hans-Peter Heim

Biopolymers · 2025

DOI: 10.1002/bip.23642 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Biopolymers, 2025. Verfasst von Margarita Reit und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Material Engineering, Polymer Engineering, University of Kassel, Kassel, Germany. Hauptthemen laut MEDLINE: Polyesters, Calorimetry, Differential Scanning, Thermogravimetry. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fachagentur Nachwachsende Rohstoffe, Bundesministerium für Ernährung und Landwirtschaft (BMEL).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the course of this study, the pyrolytic degradation characteristics of three poly(lactic acid) (PLA) types were investigated under inert conditions using dynamic thermogravimetric analysis (TGA) across the temperature range of 23°C–600°C with four heating rates. Specifically, the activation energy and its implications were determined at different stages of degradation. For this purpose, a comparative analysis of various isoconversional methods, including Kissinger, Flynn‐Wall‐Ozawa (FWO), Friedman, and Kissinger‐Akahira‐Sunnose (KAS) was undertaken to evaluate the reliability of each. The results indicate a decrease in thermal stability, indicated by a shift of the derived mass loss curves to lower temperatures, as confirmed by an increased water content and decreased crystallinity of the test specimen during aging. The study also highlights that if crystallinity and moisture content increase moderately, the thermal degradation curves remain unchanged. Additionally, kinetic analyses using mentioned models indicate a multi‐step degradation process of PLA. The activation energy fluctuates with the conversion rate, suggesting complex underlying kinetics. These findings emphasize the need for dynamic adjustment of predictive models for material lifespan. The three PLA types were characterized by Differential Scanning Calorimetry (DSC), moisture absorption measurement and Gel permeation chromatography (GPC).

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolyestersCalorimetry, Differential ScanningThermogravimetryKineticsTemperatureWaterHot TemperatureChromatography, Gel

Stichwörter der Autor:innen

activation energyartificially accelerated agingbiopolymerskinetic modelspoly(lactic‐acid)thermal degradationthermogravimetric analysis

Substanzen

poly(lactide)PolyestersWater

Autor:innen und Institutionen

  • Institute of Material Engineering, Polymer Engineering, University of Kassel, Kassel, Germany.

ORCID-Profile: Margarita Reit

Förderung

  • Fachagentur Nachwachsende Rohstoffe
  • Bundesministerium für Ernährung und Landwirtschaft (BMEL)

Zitieren

APA

Reit, M., Krug, N., Zarges, J. C., & Heim, H. P. (2025). Evaluation of the Activation Energy for Pyrolytic Degradation of Poly‐L‐Lactide ( PLA ) During Artificially Accelerated Aging. Biopolymers. https://doi.org/10.1002/bip.23642

Vancouver

Reit M, Krug N, Zarges JC, Heim HP. Evaluation of the Activation Energy for Pyrolytic Degradation of Poly‐L‐Lactide ( PLA ) During Artificially Accelerated Aging. Biopolymers. 2025. doi:10.1002/bip.23642

BibTeX
@article{Reit2025,
  author = {Reit, Margarita and Krug, Natalie and Zarges, Jan-Christoph and Heim, Hans-Peter},
  title = {Evaluation of the Activation Energy for Pyrolytic Degradation of Poly‐L‐Lactide ( PLA ) During Artificially Accelerated Aging},
  journal = {Biopolymers},
  year = {2025},
  doi = {10.1002/bip.23642}
}
Kostenlos starten →