Strategic Integration of FAPbI 3 and FASnI 3 in a Dual‐Absorber Perovskite Solar Cell Architecture for Enhanced Spectral Utilization and Photovoltaic Performance
Luminescence · 2026-11 · 41 (11)
DOI: 10.1002/bio.70653 ↗At a glance
Journal article in Luminescence, published online on 2026-11-16. Written by Nikita Rai and 7 co-authors. Institution: Photonics and Photovoltaic Research Lab (PPRL), Department of Physics and Material Science, Madan Mohan Malaviya University of Technology, Gorakhpur,…. Major MEDLINE topics: Solar Energy, Titanium, Oxides, Calcium Compounds. 47 references.
Abstract (original language)
Over the past decade, perovskite solar cells (PSCs) have gained significant attention as promising photovoltaic devices due to their high efficiency and simple fabrication process. Nevertheless, operational stability and the interface loss still constitute critical challenges to achieving practical implementation of these cells on a large scale. Therefore, this study focuses on investigating the behavior of a novel tandem‐like mixed perovskite‐based heterojunction solar cell with the device configuration FTO (TCO)/TiO 2 (ETL)/FAPbI 3 /FASnI 3 /Spiro‐OMeTAD (HTL)/Gold (Au) using SCAPS‐1D. The combination of FAPbI 3 and FASnI 3 perovskites leads to a higher compatibility of bands and effective carrier separation and recombination compared to traditional solar cells. Some device parameters for instance thickness of absorber layer, bulk defect density, carrier density and other parameters that affect interface losses have been optimized to get the highest performance of this solar cell. Internal resistances, device temperature and back‐contact work function have been considered to check the influence of these factors on the device output and durability of the solar cell. As a result, the optimized device exhibited short‐circuit current density (J SC ), open‐circuit voltage (V OC ), fill factor (FF), and power conversion efficiency (PCE) values of 31.42 mA/cm 2 , 1.20 V, 85.80%, and 32.44%, respectively. The obtained results can serve as a useful guideline for improving the efficiency and stability of next‐generation PSCs.
Subjects
MeSH terms (MEDLINE)
Author keywords
Substances
Authors and institutions
- Photonics and Photovoltaic Research Lab (PPRL), Department of Physics and Material Science, Madan Mohan Malaviya University of Technology, Gorakhpur, India.
- Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, India.
- Experimental Research Laboratory, Department of Physics ARSD College, University of Delhi, New Delhi, India.
- Department of Physics, Manipal University Jaipur, Jaipur, India.
- Carbon Sources and Conversion, Ruhr-Universität Bochum, Bochum, Germany.
- Technology Innovation Hub, Indian Institute of Technology Guwahati, Guwahati, Assam, India.
ORCID profiles: Yashwant Kumar Singh, D K Dwivedi, Pooja Lohia, Manish Kumar, Pravin Kumar Singh, Sagar Bhattarai, Nikhil Kumar
Cite
APA
Rai, N., Singh, Y. K., Dwivedi, D. K., Lohia, P., Kumar, M., Singh, P. K., Bhattarai, S., & Kumar, N. (2026). Strategic Integration of FAPbI 3 and FASnI 3 in a Dual‐Absorber Perovskite Solar Cell Architecture for Enhanced Spectral Utilization and Photovoltaic Performance. Luminescence, 41(11). https://doi.org/10.1002/bio.70653
Vancouver
Rai N, Singh YK, Dwivedi DK, Lohia P, Kumar M, Singh PK, et al. Strategic Integration of FAPbI 3 and FASnI 3 in a Dual‐Absorber Perovskite Solar Cell Architecture for Enhanced Spectral Utilization and Photovoltaic Performance. Luminescence. 2026;41(11). doi:10.1002/bio.70653
BibTeX
@article{Rai2026,
author = {Rai, Nikita and Singh, Yashwant Kumar and Dwivedi, D K and Lohia, Pooja and Kumar, Manish and Singh, Pravin Kumar and Bhattarai, Sagar and Kumar, Nikhil},
title = {Strategic Integration of FAPbI 3 and FASnI 3 in a Dual‐Absorber Perovskite Solar Cell Architecture for Enhanced Spectral Utilization and Photovoltaic Performance},
journal = {Luminescence},
year = {2026},
volume = {41},
number = {11},
doi = {10.1002/bio.70653}
}
EUVIMED