EUVIMEDSkopri EUVIMED
Crossref

Converting coconut meal into biothermoplastics for industrial applications

Narendra Reddy, Vijaykumar Guna, Nagananda GS, Supritha Muppuri, Pornanong Aramwit

Biofuels, Bioproducts and Biorefining · 2024-01 · 18 (1) · 113-124

DOI: 10.1002/bbb.2552 ↗

At a glance

Journal article in Biofuels, Bioproducts and Biorefining, published online on 2023-11-06. Written by Narendra Reddy and 4 co-authors. Cited 3 times so far (Crossref); 26 references. Funded by: National Research Council of Thailand.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

We present a simple approach to convert coconut (copra) oil cake into biothermoplastics with properties that are suitable for replacing synthetic polymer‐based plastics in current use. About 1.9 million tons of copra meal are generated ever year as coproducts and are available at $0.50–$0.60 per kilogram, making it a renewable, sustainable and low‐cost raw material. Despite containing proteins, carbohydrates and oil, there are limited non‐food applications of oil meals since most oil meals are typically non‐thermoplastic and hence difficult to be processed into bioproducts. In this study, we report the processing of copra meal into biothermoplastics in the presence of various plasticizers, heat and pressure. Compression molded films and bioproducts were developed from copra meal by heating at 130°C in the presence of glycerol, coconut oil or cashew shell oil as plasticizer. The films obtained had tensile strength of up to 4.4 MPa and were inherently stable in water. A one‐step crosslinking with citric acid was done to further improve the strength and stability of the films. With large availability at low cost, copra meal provides an opportunity to develop low‐cost, biodegradable, edible and innovative bioproducts that have the potential to replace the synthetic polymer‐based plastics in current use, particularly single‐use plastics.

Funding

  • National Research Council of Thailand

Cite

APA

Reddy, N., Guna, V., GS, N., Muppuri, S., & Aramwit, P. (2024). Converting coconut meal into biothermoplastics for industrial applications. Biofuels, Bioproducts and Biorefining, 18(1), 113-124. https://doi.org/10.1002/bbb.2552

Vancouver

Reddy N, Guna V, GS N, Muppuri S, Aramwit P. Converting coconut meal into biothermoplastics for industrial applications. Biofuels, Bioproducts and Biorefining. 2024;18(1):113-124. doi:10.1002/bbb.2552

BibTeX
@article{Reddy2024,
  author = {Reddy, Narendra and Guna, Vijaykumar and GS, Nagananda and Muppuri, Supritha and Aramwit, Pornanong},
  title = {Converting coconut meal into biothermoplastics for industrial applications},
  journal = {Biofuels, Bioproducts and Biorefining},
  year = {2024},
  volume = {18},
  number = {1},
  pages = {113--124},
  doi = {10.1002/bbb.2552}
}
Start for free →