EUVIMEDOpdag EUVIMED
Crossref

Eco‐friendly polyol through in situ hydroxylation from epoxidation of palm oleic acid via heterogeneous catalyst

Intan S. Azmi, Abdul Hadi, Mohd J. Jalil

Biofuels, Bioproducts and Biorefining · 2023-05 · 17 (3) · 537-548

DOI: 10.1002/bbb.2456 ↗

At a glance

Journal article in Biofuels, Bioproducts and Biorefining, published online on 2022-12-14. Written by Intan S. Azmi and 2 co-authors. Cited 11 times so far (Crossref); 37 references. Funded by: Universiti Teknologi MARA.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The world's consumption of raw materials has shifted from the use of non‐renewable materials to renewable materials. Studies on greener epoxidation using vegetable oils to produce eco‐friendly polyol have also increased. This study aims to produce polyol‐based epoxidized palm oleic acid with a high hydroxyl value by a novel method which is continuous hydroxylation of epoxidized palm oleic acid using a heterogeneous catalyst. Starting from the raw palm oleic acid, the double bonds are functionalized by introducing epoxy groups and ring‐opened to produce hydroxyl groups. The best process parameters for epoxidation were optimized to maximize the oxirane value and to focus on oxirane stability. The relative conversion to the oxirane percentage was maximum (82%) after 30 min of epoxidation reaction. Fourier transform infrared spectroscopy showed an absorption peak at a wavelength of 3300 cm −1 , indicating the presence of a hydroxyl group when polyol was analyzed. Overall, polyol with a high hydroxyl value (339 mg KOH/g), high yield (80.7%) and average molecular weight of 1045 Da was successfully produced from palm oleic acid using continuous hydroxylation of epoxidized oleic acid. Based on hydroxyl value and average molecular weight, the polyol is deemed suitable for producing rigid polyurethane foam. © 2022 Society of Chemical Industry and John Wiley & Sons, Ltd.

Funding

  • Universiti Teknologi MARA

Cite

APA

Azmi, I. S., Hadi, A., & Jalil, M. J. (2023). Eco‐friendly polyol through in situ hydroxylation from epoxidation of palm oleic acid via heterogeneous catalyst. Biofuels, Bioproducts and Biorefining, 17(3), 537-548. https://doi.org/10.1002/bbb.2456

Vancouver

Azmi IS, Hadi A, Jalil MJ. Eco‐friendly polyol through in situ hydroxylation from epoxidation of palm oleic acid via heterogeneous catalyst. Biofuels, Bioproducts and Biorefining. 2023;17(3):537-548. doi:10.1002/bbb.2456

BibTeX
@article{Azmi2023,
  author = {Azmi, Intan S. and Hadi, Abdul and Jalil, Mohd J.},
  title = {Eco‐friendly polyol through in situ hydroxylation from epoxidation of palm oleic acid via heterogeneous catalyst},
  journal = {Biofuels, Bioproducts and Biorefining},
  year = {2023},
  volume = {17},
  number = {3},
  pages = {537--548},
  doi = {10.1002/bbb.2456}
}
Start for free →