EUVIMEDEUVIMED entdecken
VergleichsstudieOpen Access · CC BY-NC 4.0

Continuous Sewing Machine‐Like Suture Provides Higher Failure and Yield Load Compared to Traditional Techniques for Meniscal Root Repair in a Biomechanical Porcine Model

Yizhong Peng, Wenbo Yang, Yi Li, Chunqing Meng, Hong Wang, Wei Huang iD

Arthroscopy · 2026

DOI: 10.1002/arj.70127 ↗

Kurz gefasst

Vergleichsstudie in der Zeitschrift Arthroscopy, 2026. Verfasst von Yizhong Peng und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopaedics, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China. Hauptthemen laut MEDLINE: Suture Techniques, Menisci, Tibial. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To evaluate the biomechanical performance of the sewing machine‐like suture (SMS) technique against three established techniques (two cinch‐loop (TCL), modified Mason‐Allen (MMA), and double Mason‐Allen (DMA)) for transtibial pull‐out repair of posterior medial meniscal root tear (PMMRT) in a porcine model.

Methods

Forty fresh‐frozen porcine medial menisci (20‐25 weeks old, no macroscopic degeneration) were randomly assigned to 4 groups for repair using TCL, MMA, DMA, or SMS. All repairs used nonabsorbable braided suture and an 18G needle. Biomechanical testing included cyclic loading to measure displacement and load‐to‐failure testing to assess ultimate failure load, yield load, stiffness, and failure displacement.

Results

SMS achieved the highest ultimate failure load (358.0 ± 34.9 N) versus DMA (308.57 ± 52.36 N, P = .0292) and TCL (227.95 ± 42.36 N, P < .0001) and the highest yield load (299.15 ± 12.2 N) versus TCL (150.0 ± 31.6 N, P < .0001) and MMA (274.21 ± 15.7 N, P = .0113). DMA showed the smallest displacement at 100 cycles (0.21 ± 0.05 mm) and 500 cycles (0.34 ± 0.06 mm). MMA had the least displacement at 1000 cycles (1.01 ± 0.13 mm) and failure (7.86 ± 0.79 mm). TCL exhibited the largest displacement at 1000 cycles (2.44 ± 0.57 mm) and lowest strength.

Conclusions

The SMS technique exhibited the higher load resistance by integrating multipoint fixation through a single‐suture mechanism, while DMA provides the best cyclic stability. Both techniques surpass conventional methods like TCL, which showed the largest displacement. Clinical Relevance This biomechanical study provides evidence to guide suture technique selection for posterior medial meniscal root repair. The SMS technique, with its superior load resistance approaching the physiological range of the native root, may be particularly advantageous in clinical scenarios demanding high fixation strength.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Suture TechniquesMenisci, TibialAnimalsBiomechanical PhenomenaSwineTibial Meniscus InjuriesSuturesRandom AllocationWeight-Bearing

Autor:innen und Institutionen

  • Department of Orthopaedics, Union Hospital, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, China.

ORCID-Profile: Wei Huang

Zitieren

APA

Peng, Y., Yang, W., Li, Y., Meng, C., Wang, H., & Huang, W. (2026). Continuous Sewing Machine‐Like Suture Provides Higher Failure and Yield Load Compared to Traditional Techniques for Meniscal Root Repair in a Biomechanical Porcine Model. Arthroscopy. https://doi.org/10.1002/arj.70127

Vancouver

Peng Y, Yang W, Li Y, Meng C, Wang H, Huang W. Continuous Sewing Machine‐Like Suture Provides Higher Failure and Yield Load Compared to Traditional Techniques for Meniscal Root Repair in a Biomechanical Porcine Model. Arthroscopy. 2026. doi:10.1002/arj.70127

BibTeX
@article{Peng2026,
  author = {Peng, Yizhong and Yang, Wenbo and Li, Yi and Meng, Chunqing and Wang, Hong and Huang, Wei},
  title = {Continuous Sewing Machine‐Like Suture Provides Higher Failure and Yield Load Compared to Traditional Techniques for Meniscal Root Repair in a Biomechanical Porcine Model},
  journal = {Arthroscopy},
  year = {2026},
  doi = {10.1002/arj.70127}
}
Kostenlos starten →