Fabrication of Porous Centrifugal Tube Cores Using High Internal Phase Emulsion for Size‐Selective Separation
Journal of Applied Polymer Science · 2026-11-05
DOI: 10.1002/app.71774 ↗At a glance
Journal article in Journal of Applied Polymer Science, published online on 2026-11-05. Written by Guangxu Chen and 4 co-authors. 64 references. Funded by: National Natural Science Foundation of China.
Abstract (original language)
Despite existing membrane, centrifugation, and microfluidic methods, a simple, disposable, centrifuge‐integrated device with tunable, sharp submicron‐to‐micron (0.2–5 μm) cutoff is still needed for bacterial purification, organelle isolation, and microvesicle enrichment. Here, a tunable porous centrifugal filtration device is designed to address these challenges. Using high internal phase emulsion (HIPE) templating, monolithic poly(styrene‐ co ‐butyl acrylate) porous centrifugal tube cores are fabricated with precisely controlled open‐cell architectures, featuring voids of 5–7.7 μm and windows of 1.3–2.9 μm. The dimensions of both voids and windows are systematically modulated by varying the internal phase volume fraction (75–90 vol%), surfactant concentration (8–23 wt%), and shear rate (9–18 krpm). Comprehensive characterization (SEM, DLS, contact angle) confirms structural fidelity, hydrophobicity, and reproducible filtration performance under the tested centrifugation conditions. Mechanical testing reveals that higher shear rates enhance the modulus (up to 37.76 MPa) by improving void uniformity. Filtration assays with monodisperse microspheres (0.367–2.85 μm) confirm sharp size selectivity, showing complete exclusion of 2.85 μm particles and > 86% transmission of 367 nm species. Binary separation studies validate high‐resolution, purely physical sieving. This scalable platform bridges a long‐standing functional void in lab‐scale separation, with promising applications in bacterial purification, organelle isolation, and microvesicle enrichment.
Funding
- National Natural Science Foundation of China
Cite
APA
Chen, G., Xu, C., Yan, Z., Yang, Q., & Zhang, S. (2026). Fabrication of Porous Centrifugal Tube Cores Using High Internal Phase Emulsion for Size‐Selective Separation. Journal of Applied Polymer Science. https://doi.org/10.1002/app.71774
Vancouver
Chen G, Xu C, Yan Z, Yang Q, Zhang S. Fabrication of Porous Centrifugal Tube Cores Using High Internal Phase Emulsion for Size‐Selective Separation. Journal of Applied Polymer Science. 2026. doi:10.1002/app.71774
BibTeX
@article{Chen2026,
author = {Chen, Guangxu and Xu, Chuanbang and Yan, Ziyi and Yang, Qingshan and Zhang, Shengmiao},
title = {Fabrication of Porous Centrifugal Tube Cores Using High Internal Phase Emulsion for Size‐Selective Separation},
journal = {Journal of Applied Polymer Science},
year = {2026},
doi = {10.1002/app.71774}
}
EUVIMED