EUVIMEDOpdag EUVIMED
Crossref

Processing‐Induced Heterogeneous Structure and Mechanical Anisotropy in Extruded Polyethylene Sheets

Ruxin Zang, Quanxiao Dong, Yubao Guo, Xianggang Du, Zhiwei Li, Yuqing Lai, Shaodong Mou, Yihuai Zhang, Zhiyong Jiang, Yongfeng Men

Journal of Applied Polymer Science · 2026-11-03

DOI: 10.1002/app.71750 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2026-11-03. Written by Ruxin Zang and 9 co-authors. 56 references. Funded by: National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Processing‐induced hierarchical structures are central to the mechanical performance of extruded polyethylene sheets. Polyethylene sheets prepared by extrusion‐calendering are studied to clarify how roller temperature and sheet thickness regulate orientation distribution, skin‐core heterogeneity, and mechanical anisotropy. Tensile tests reveal that extrusion‐direction specimens possess higher strength, modulus, and toughness, whereas transverse specimens show larger elongation at break. SEM observations identify layered morphologies near the surface and a uniform core. Synchrotron microfocus WAXD mapping resolves the crystal orientation: the width direction remains weakly oriented, while the thickness direction develops a pronounced skin‐core gradient. Strong orientation and azimuthal peak shifts appear in near‐surface regions, indicating chain alignment and orientation‐direction deviation under coupled shear and cooling conditions. Decreasing roller temperature enhances the retention of non‐equilibrium orientation by limiting molecular relaxation after calendering. Reducing sheet thickness further strengthens surface orientation by increasing high‐shear regions and shortening the cooling distance. Quantitatively, for the sheet prepared at an extrusion thickness of 2 mm and a roller temperature of 80°C, the affected surface‐layer depth decreases from 300 μm near the water inlet to 60 μm near the outlet, while the width‐direction orientation factor remains around −0.03. These results provide guidance for regulating the performance of polyolefin sheets.

Funding

  • National Natural Science Foundation of China

Cite

APA

Zang, R., Dong, Q., Guo, Y., Du, X., Li, Z., Lai, Y., Mou, S., Zhang, Y., Jiang, Z., & Men, Y. (2026). Processing‐Induced Heterogeneous Structure and Mechanical Anisotropy in Extruded Polyethylene Sheets. Journal of Applied Polymer Science. https://doi.org/10.1002/app.71750

Vancouver

Zang R, Dong Q, Guo Y, Du X, Li Z, Lai Y, et al. Processing‐Induced Heterogeneous Structure and Mechanical Anisotropy in Extruded Polyethylene Sheets. Journal of Applied Polymer Science. 2026. doi:10.1002/app.71750

BibTeX
@article{Zang2026,
  author = {Zang, Ruxin and Dong, Quanxiao and Guo, Yubao and Du, Xianggang and Li, Zhiwei and Lai, Yuqing and Mou, Shaodong and Zhang, Yihuai and Jiang, Zhiyong and Men, Yongfeng},
  title = {Processing‐Induced Heterogeneous Structure and Mechanical Anisotropy in Extruded Polyethylene Sheets},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  doi = {10.1002/app.71750}
}
Start for free →