EUVIMEDEUVIMED entdecken
Crossref

An Energy Efficient Injection Molding Process Based on Dynamic Thermal Equilibrium Within the Mold Cavity

Jun Xie, Chuanjie Liu, Haowei Ma, Peng Zhao, Shaofei Jiang, Zhutong Li, Jiquan Li

Journal of Applied Polymer Science · 15.12.2026 · 143 (47)

DOI: 10.1002/app.71595 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 15.10.2026. Verfasst von Jun Xie und 6 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In injection molding, maintaining the mold temperature needs large energy consumption. In fact, heat carried by melt can enable mold temperature to reach a dynamic thermal equilibrium. Induction heating was introduced to realize the thermal equilibrium, which provides an initial condition with low energy consumption and ensures effective filling of the mold cavity during the balancing process. Through theoretical simplification, a finite element analysis model is developed, which accurately captures the mold temperature field evolution during thermal balancing. This model is validated using injection molding experiments, power measurements, and product characterization tests. Simulation results indicate that the mold surface undergoes multiple distinct stages during continuous injection molding before reaching thermal equilibrium. The rationality of the finite element model and the feasibility of the new process were confirmed through comparison between simulated and experimental temperature data. The final equilibrium temperature can be determined by the base mold temperature, induction heating temperature, and cooling time. Energy consumption analysis demonstrated that the new process saves a maximum of 41.11% energy consumption compared to the conventional constant‐temperature process at a mold temperature of 75°C. The characterization results of crystallinity and glossiness of parts have verified the feasibility of the new process. In conclusion, this study offers a promising solution for energy conservation in the injection molding industry.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Province

Zitieren

APA

Xie, J., Liu, C., Ma, H., Zhao, P., Jiang, S., Li, Z., & Li, J. (2026). An Energy Efficient Injection Molding Process Based on Dynamic Thermal Equilibrium Within the Mold Cavity. Journal of Applied Polymer Science, 143(47). https://doi.org/10.1002/app.71595

Vancouver

Xie J, Liu C, Ma H, Zhao P, Jiang S, Li Z, et al. An Energy Efficient Injection Molding Process Based on Dynamic Thermal Equilibrium Within the Mold Cavity. Journal of Applied Polymer Science. 2026;143(47). doi:10.1002/app.71595

BibTeX
@article{Xie2026,
  author = {Xie, Jun and Liu, Chuanjie and Ma, Haowei and Zhao, Peng and Jiang, Shaofei and Li, Zhutong and Li, Jiquan},
  title = {An Energy Efficient Injection Molding Process Based on Dynamic Thermal Equilibrium Within the Mold Cavity},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {47},
  doi = {10.1002/app.71595}
}
Kostenlos starten →