EUVIMEDSkopri EUVIMED
Crossref

Effect of Hydroxyapatite Particle Size on Mechanical and Thermal Properties of FDM Printed PEEK Composites

Justy N. Francis, Ananya Chattree, Mrityunjay Doddamani, Indranil Banerjee, Ankita Chugh, Jaiveer Singh

Journal of Applied Polymer Science · 2026-09-15 · 143 (35)

DOI: 10.1002/app.71058 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2026-06-22. Written by Justy N. Francis and 5 co-authors. 61 references.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Polyetheretherketone (PEEK) is FDA‐approved and bioinert, which has prompted researchers to modify this nature by incorporating bioactive inorganic fillers, mainly hydroxyapatite (HA). This study compares and establishes a correlation between particle size (nano vs. micro) of hydroxyapatite and its impact on the thermal and mechanical properties of PEEK‐HA polymer composites. Thermal analysis reveals a slight decrease of 2°C–4°C in the glass transition and melting temperatures of the HA‐incorporated PEEK samples. Tensile and flexural tests demonstrate that the size of HA significantly influences the mechanical properties, with nano‐hydroxyapatite (nHA) PEEK exhibiting superior performance compared to micro‐hydroxyapatite (mHA). On evaluating the ultimate tensile strength, PEEK‐nHA (PnH) is 28.09% higher than PEEK‐mHA (PmH), and the tensile modulus of PnH is 17.67% higher than PmH. A similar trend is seen for flexural strength, where PnH depicts 19.87% higher flexural strength than PmH. FE‐SEM fractography of the samples reveals that mHA particles have a greater impact on sample failure. The results together imply that nHA is more suitable than mHA when used as a filler particle for creating polymer composites with desirable properties. This study offers a thorough insight into the performance and suitability of these polymer composites for patient‐specific implants in load‐sharing applications.

Cite

APA

Francis, J. N., Chattree, A., Doddamani, M., Banerjee, I., Chugh, A., & Singh, J. (2026). Effect of Hydroxyapatite Particle Size on Mechanical and Thermal Properties of FDM Printed PEEK Composites. Journal of Applied Polymer Science, 143(35). https://doi.org/10.1002/app.71058

Vancouver

Francis JN, Chattree A, Doddamani M, Banerjee I, Chugh A, Singh J. Effect of Hydroxyapatite Particle Size on Mechanical and Thermal Properties of FDM Printed PEEK Composites. Journal of Applied Polymer Science. 2026;143(35). doi:10.1002/app.71058

BibTeX
@article{Francis2026,
  author = {Francis, Justy N. and Chattree, Ananya and Doddamani, Mrityunjay and Banerjee, Indranil and Chugh, Ankita and Singh, Jaiveer},
  title = {Effect of Hydroxyapatite Particle Size on Mechanical and Thermal Properties of FDM Printed PEEK Composites},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {35},
  doi = {10.1002/app.71058}
}
Start for free →