Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing
Journal of Applied Polymer Science · 2026-09-05 · 143 (33)
DOI: 10.1002/app.70947 ↗At a glance
Journal article in Journal of Applied Polymer Science, published online on 2026-06-03. Written by Haiyan Li and 7 co-authors. 24 references. Funded by: Natural Science Foundation of Heilongjiang Province.
Abstract (original language)
Conventional poly( l ‐lactic acid) (PLLA) exhibits a relatively high switching temperature, limiting its on‐demand actuation under mild biomedical conditions. Herein, poly( l ‐lactide‐co‐ε‐caprolactone) (PLCL) was incorporated into PLLA to improve chain mobility and elasticity, and (MWCNTs–ZnO)@polydopamine nanoparticles (CZP) were introduced to construct a near‐infrared (NIR)‐responsive photothermal shape‐memory system. The resulting PLLA/PLCL/CZP composites showed improved crystallinity, mechanical performance, and light‐triggered actuation. At 1 wt% CZP, the film exhibited optimal tensile properties, with a tensile strength of 24.5 MPa and an elongation at break of 373%. Under 808 nm NIR irradiation, the composites rapidly recovered their original shape at approximately 55°C, enabling remote and mild‐temperature actuation. Direct‐ink‐written 4D‐printed scaffolds displayed high print fidelity and enhanced compressive properties, with 3 wt% CZP reaching a compressive strength of 5.2 MPa and a modulus of 0.6 MPa at 40% strain. The scaffolds showed shape‐fixity ratios above 95% and recovery ratios above 80%. Biological evaluations revealed acceptable initial cell adhesion, concentration‐dependent cytocompatibility, and antibacterial activity against E. coli and S. aureus . This work provides a tunable platform for NIR‐triggered shape‐memory actuation and programmable 4D‐printed biomedical scaffolds.
Funding
- Natural Science Foundation of Heilongjiang Province
Cite
APA
Li, H., Zhang, K., Zheng, S., Ma, J., Zhao, L., Wang, J., Yin, L., & Zou, Y. (2026). Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing. Journal of Applied Polymer Science, 143(33). https://doi.org/10.1002/app.70947
Vancouver
Li H, Zhang K, Zheng S, Ma J, Zhao L, Wang J, et al. Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing. Journal of Applied Polymer Science. 2026;143(33). doi:10.1002/app.70947
BibTeX
@article{Li2026,
author = {Li, Haiyan and Zhang, Kai and Zheng, Shuai and Ma, Jing and Zhao, Long and Wang, Jialiang and Yin, Lili and Zou, Yulong},
title = {Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing},
journal = {Journal of Applied Polymer Science},
year = {2026},
volume = {143},
number = {33},
doi = {10.1002/app.70947}
}
EUVIMED