EUVIMEDEUVIMED entdecken
Crossref

Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing

Haiyan Li, Kai Zhang, Shuai Zheng, Jing Ma, Long Zhao, Jialiang Wang, Lili Yin, Yulong Zou

Journal of Applied Polymer Science · 05.09.2026 · 143 (33)

DOI: 10.1002/app.70947 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 03.06.2026. Verfasst von Haiyan Li und 7 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Gefördert von: Natural Science Foundation of Heilongjiang Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional poly( l ‐lactic acid) (PLLA) exhibits a relatively high switching temperature, limiting its on‐demand actuation under mild biomedical conditions. Herein, poly( l ‐lactide‐co‐ε‐caprolactone) (PLCL) was incorporated into PLLA to improve chain mobility and elasticity, and (MWCNTs–ZnO)@polydopamine nanoparticles (CZP) were introduced to construct a near‐infrared (NIR)‐responsive photothermal shape‐memory system. The resulting PLLA/PLCL/CZP composites showed improved crystallinity, mechanical performance, and light‐triggered actuation. At 1 wt% CZP, the film exhibited optimal tensile properties, with a tensile strength of 24.5 MPa and an elongation at break of 373%. Under 808 nm NIR irradiation, the composites rapidly recovered their original shape at approximately 55°C, enabling remote and mild‐temperature actuation. Direct‐ink‐written 4D‐printed scaffolds displayed high print fidelity and enhanced compressive properties, with 3 wt% CZP reaching a compressive strength of 5.2 MPa and a modulus of 0.6 MPa at 40% strain. The scaffolds showed shape‐fixity ratios above 95% and recovery ratios above 80%. Biological evaluations revealed acceptable initial cell adhesion, concentration‐dependent cytocompatibility, and antibacterial activity against E. coli and S. aureus . This work provides a tunable platform for NIR‐triggered shape‐memory actuation and programmable 4D‐printed biomedical scaffolds.

Förderung

  • Natural Science Foundation of Heilongjiang Province

Zitieren

APA

Li, H., Zhang, K., Zheng, S., Ma, J., Zhao, L., Wang, J., Yin, L., & Zou, Y. (2026). Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing. Journal of Applied Polymer Science, 143(33). https://doi.org/10.1002/app.70947

Vancouver

Li H, Zhang K, Zheng S, Ma J, Zhao L, Wang J, et al. Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing. Journal of Applied Polymer Science. 2026;143(33). doi:10.1002/app.70947

BibTeX
@article{Li2026,
  author = {Li, Haiyan and Zhang, Kai and Zheng, Shuai and Ma, Jing and Zhao, Long and Wang, Jialiang and Yin, Lili and Zou, Yulong},
  title = {Near‐Infrared‐Responsive Poly( l ‐Lactic Acid)/poly( l ‐Lactide‐Co‐ε‐Caprolactone) Shape‐Memory Composites Reinforced With Photothermal Hybrid Nanoparticles for 4D Printing},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {33},
  doi = {10.1002/app.70947}
}
Kostenlos starten →