EUVIMEDOpdag EUVIMED
Crossref

Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning

Cheng‐Jun Li, Si‐Yu Yang, Lin Feng, Xuesong Wu, Jing Tan, Haoyi Li, Weimin Yang

Journal of Applied Polymer Science · 2026-07-15 · 143 (27)

DOI: 10.1002/app.70822 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2026-04-28. Written by Cheng‐Jun Li and 6 co-authors. Cited 1 times so far (Crossref); 43 references. Funded by: National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Melt electrospinning has attracted interest as an efficient technology with industrial potential. However, challenges such as low efficiency and insufficient fiber refinement arise when processing high‐viscosity melts. This study therefore proposes combining traditional polyethylene (PE) gel spinning with melt electrospinning to manufacture high‐performance PE fibrous mats. First, linear low‐density polyethylene (LLDPE) and ultrahigh molecular weight polyethylene (UHMWPE) were blended into a PE gel. Then, the composite fibrous mats were prepared via melt electrospinning and hot stretching processes. Rheological and Raman analyses revealed that a composite fibrous mat containing 33 wt% LLDPE and 1.0 wt% UHMWPE exhibited optimal polymer compatibility and dispersion, resulting in the formation of a uniform physically entangled network. Hot stretching promotes stress‐induced lamellar rearrangement and molecular‐chain orientation, resulting in enhanced crystallinity, molecular orientation, and mechanical properties. At a draw ratio of 4, the stress of the composite fibrous mat increased from 17 MPa in the unstretched state to 54 MPa. This method overcomes the limitations of processing PE via melt electrospinning and provides a new approach for processing polymers with similar rheological properties.

Funding

  • National Natural Science Foundation of China

Cite

APA

Li, C., Yang, S., Feng, L., Wu, X., Tan, J., Li, H., & Yang, W. (2026). Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning. Journal of Applied Polymer Science, 143(27). https://doi.org/10.1002/app.70822

Vancouver

Li C, Yang S, Feng L, Wu X, Tan J, Li H, et al. Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning. Journal of Applied Polymer Science. 2026;143(27). doi:10.1002/app.70822

BibTeX
@article{Li2026,
  author = {Li, Cheng‐Jun and Yang, Si‐Yu and Feng, Lin and Wu, Xuesong and Tan, Jing and Li, Haoyi and Yang, Weimin},
  title = {Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {27},
  doi = {10.1002/app.70822}
}
Start for free →