EUVIMEDAtrasti EUVIMED
Open access · CC BY-NC-ND 4.0

Hybridization Effects of Carbon Fillers on the Electrical, Thermal, and Mechanical Performances of PVDF ‐Based Composites

Sarra Khairi, Ehsan Rostami‐Tapeh‐Esmaeil, Frej Mighri, Saïd Elkoun, Martin Brassard, Elaheh Oliaii, Philippe Pelletier, Guy Jourdain, Yves Bonnefoy

Journal of Applied Polymer Science · 2026-03-20 · 143 (12)

DOI: 10.1002/app.70331 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2026-01-15. Written by Sarra Khairi and 8 co-authors. Cited 2 times so far (Crossref); 56 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Natural Sciences and Engineering Research Council of Canada.

SantraukaBibliografiniai duomenysCiteRelated studies

Abstract (original language)

This study explores the synergistic effects of hybrid graphite (GR) fillers combined with carbon fibers (CFs) and carbon black (CB) on the performance of PVDF‐based conductive polymer composites (CPCs). Composites were formulated with a fixed GR loading of 60 wt% using optimized mixtures of GR particle sizes: G1 (5.9 μm), G2 (17.8 μm), and G3 (561 μm). To investigate the synergistic effect of hybrid carbon additives on CPCs performance, up to 10 wt% of GR was replaced with CB, CF, or a CB/CF mixture. The G2/G3 (3:1) system showed optimal binary GR performance, with a decomposition temperature of 425°C, through‐plane/in‐plane resistivities of 0.66/0.58 Ω cm, and flexural/compressive strengths of 41.5/17.1 MPa. Replacing 7.5 wt% of G2/G3 with CF improved thermal stability (440°C) and lowered through‐plane/in‐plane resistivities (0.33/0.17 Ω cm), although it slightly decreased flexural/compressive strengths (37.2/13.0 MPa). Replacing 5 wt% with CB reduced thermal stability (400°C) but further lowered both resistivities (0.23/0.16 Ω cm), along with reducing strengths (19.5/5.2 MPa). A ternary mixture (CF/CB: 2.5/7.5 wt%) yielded the best electrical performance (0.097/0.087 Ω cm), modest strengths (16.1/3.6 MPa), and a decomposition temperature of 402°C. These results highlight how tuning filler size and composition enhances the multifunctional performance of PVDF‐based CPCs.

Funding

  • Natural Sciences and Engineering Research Council of Canada

Cite

APA

Khairi, S., Rostami‐Tapeh‐Esmaeil, E., Mighri, F., Elkoun, S., Brassard, M., Oliaii, E., Pelletier, P., Jourdain, G., & Bonnefoy, Y. (2026). Hybridization Effects of Carbon Fillers on the Electrical, Thermal, and Mechanical Performances of PVDF ‐Based Composites. Journal of Applied Polymer Science, 143(12). https://doi.org/10.1002/app.70331

Vancouver

Khairi S, Rostami‐Tapeh‐Esmaeil E, Mighri F, Elkoun S, Brassard M, Oliaii E, et al. Hybridization Effects of Carbon Fillers on the Electrical, Thermal, and Mechanical Performances of PVDF ‐Based Composites. Journal of Applied Polymer Science. 2026;143(12). doi:10.1002/app.70331

BibTeX
@article{Khairi2026,
  author = {Khairi, Sarra and Rostami‐Tapeh‐Esmaeil, Ehsan and Mighri, Frej and Elkoun, Saïd and Brassard, Martin and Oliaii, Elaheh and Pelletier, Philippe and Jourdain, Guy and Bonnefoy, Yves},
  title = {Hybridization Effects of Carbon Fillers on the Electrical, Thermal, and Mechanical Performances of PVDF ‐Based Composites},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {12},
  doi = {10.1002/app.70331}
}
Start for free →