EUVIMEDOpdag EUVIMED
Crossref

Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance

Halide Melik, Serife Yalcin, Bulent Aktas, Hatice Gumushan Aktas, Ebru Uyar, Zeynep Celik, Busra Ergin, Gokhan Demircan, Mehmet Vehbi Balak

Journal of Applied Polymer Science · 2026-03-15 · 143 (11)

DOI: 10.1002/app.70277 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2025-12-30. Written by Halide Melik and 8 co-authors. Cited 8 times so far (Crossref); 64 references. Funded by: Harran Üniversitesi, Türkiye Sağlık Enstitüleri Başkanlığı.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study integrates digital light processing (DLP)‐based additive manufacturing with systematic modulation of trimethylsilyl silane (TRIS) content to elucidate the combined effects of formulation and processing on the performance of 2‐hydroxyethyl methacrylate (HEMA)‐based hydrogel contact lenses. HEMA hydrogels containing 0–20 wt% TRIS were fabricated via DLP 3D printing and evaluated in terms of physical, optical, thermal, mechanical, and biological properties. Equilibrium water content ranged from 22% to 36%, reaching full swelling within 24 h, while static water contact angles varied between 43° and 63°. All samples exhibited excellent optical transparency (95.8%–98.5%) in the visible range, with effective UV blocking below 240 nm. Differential scanning calorimetry showed that the glass transition temperature increased from 14°C (HT0) to 47°C at 10 wt% TRIS, followed by a slight decrease at higher TRIS contents. Dry‐state tensile strength decreased with increasing TRIS, whereas hydrated samples exhibited reduced strength but enhanced elongation. Cytocompatibility tests using ARPE‐19 cells confirmed high viability (≥ 96%) for all formulations. Protein adsorption remained low, and bacterial adhesion was significantly reduced, particularly against Escherichia coli and Staphylococcus aureus , with maximum reductions observed at 5–10 wt% TRIS. Overall, formulations containing 5–10 wt% TRIS provided an optimal balance of hydration, transparency, thermal stability, mechanical compliance, and antimicrobial performance, highlighting their potential for biocompatible contact lens applications.

Funding

  • Harran Üniversitesi
  • Türkiye Sağlık Enstitüleri Başkanlığı

Cite

APA

Melik, H., Yalcin, S., Aktas, B., Aktas, H. G., Uyar, E., Celik, Z., Ergin, B., Demircan, G., & Balak, M. V. (2026). Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance. Journal of Applied Polymer Science, 143(11). https://doi.org/10.1002/app.70277

Vancouver

Melik H, Yalcin S, Aktas B, Aktas HG, Uyar E, Celik Z, et al. Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance. Journal of Applied Polymer Science. 2026;143(11). doi:10.1002/app.70277

BibTeX
@article{Melik2026,
  author = {Melik, Halide and Yalcin, Serife and Aktas, Bulent and Aktas, Hatice Gumushan and Uyar, Ebru and Celik, Zeynep and Ergin, Busra and Demircan, Gokhan and Balak, Mehmet Vehbi},
  title = {Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {11},
  doi = {10.1002/app.70277}
}
Start for free →