Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance
Journal of Applied Polymer Science · 15.03.2026 · 143 (11)
DOI: 10.1002/app.70277 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 30.12.2025. Verfasst von Halide Melik und 8 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 64 Literaturangaben. Gefördert von: Harran Üniversitesi, Türkiye Sağlık Enstitüleri Başkanlığı.
Abstract (Originalsprache)
This study integrates digital light processing (DLP)‐based additive manufacturing with systematic modulation of trimethylsilyl silane (TRIS) content to elucidate the combined effects of formulation and processing on the performance of 2‐hydroxyethyl methacrylate (HEMA)‐based hydrogel contact lenses. HEMA hydrogels containing 0–20 wt% TRIS were fabricated via DLP 3D printing and evaluated in terms of physical, optical, thermal, mechanical, and biological properties. Equilibrium water content ranged from 22% to 36%, reaching full swelling within 24 h, while static water contact angles varied between 43° and 63°. All samples exhibited excellent optical transparency (95.8%–98.5%) in the visible range, with effective UV blocking below 240 nm. Differential scanning calorimetry showed that the glass transition temperature increased from 14°C (HT0) to 47°C at 10 wt% TRIS, followed by a slight decrease at higher TRIS contents. Dry‐state tensile strength decreased with increasing TRIS, whereas hydrated samples exhibited reduced strength but enhanced elongation. Cytocompatibility tests using ARPE‐19 cells confirmed high viability (≥ 96%) for all formulations. Protein adsorption remained low, and bacterial adhesion was significantly reduced, particularly against Escherichia coli and Staphylococcus aureus , with maximum reductions observed at 5–10 wt% TRIS. Overall, formulations containing 5–10 wt% TRIS provided an optimal balance of hydration, transparency, thermal stability, mechanical compliance, and antimicrobial performance, highlighting their potential for biocompatible contact lens applications.
Förderung
- Harran Üniversitesi
- Türkiye Sağlık Enstitüleri Başkanlığı
Zitieren
APA
Melik, H., Yalcin, S., Aktas, B., Aktas, H. G., Uyar, E., Celik, Z., Ergin, B., Demircan, G., & Balak, M. V. (2026). Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance. Journal of Applied Polymer Science, 143(11). https://doi.org/10.1002/app.70277
Vancouver
Melik H, Yalcin S, Aktas B, Aktas HG, Uyar E, Celik Z, et al. Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance. Journal of Applied Polymer Science. 2026;143(11). doi:10.1002/app.70277
BibTeX
@article{Melik2026,
author = {Melik, Halide and Yalcin, Serife and Aktas, Bulent and Aktas, Hatice Gumushan and Uyar, Ebru and Celik, Zeynep and Ergin, Busra and Demircan, Gokhan and Balak, Mehmet Vehbi},
title = {Three‐Dimensionally Printed HEMA – TRIS Hydrogel Contact Lenses With Optimized Optical, Mechanical, and Antibacterial Performance},
journal = {Journal of Applied Polymer Science},
year = {2026},
volume = {143},
number = {11},
doi = {10.1002/app.70277}
}
EUVIMED