EUVIMEDSkopri EUVIMED
Crossref

Effect of Reinforcement Type and Epoxy‐to‐Hardener Ratio on the Curing Quality and Mechanical Properties of Epoxy Composites

M. N. A. Mazumder Rupam, Md. Jahangir Alam, Mahbub Hossen Molla, Jannat Ara Mim, Md. Ehasanul Haque, Md. Sarowar Hossain, M. D. Hossain, Md Razibul Hasan

Journal of Applied Polymer Science · 2026-01-20 · 143 (4)

DOI: 10.1002/app.58109 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2025-10-17. Written by M. N. A. Mazumder Rupam and 7 co-authors. Cited 3 times so far (Crossref); 33 references.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

The effect of reinforcement type, along with epoxy‐to‐hardener ratio (ER:H), on the curing quality and overall performance of epoxy composites has not yet been adequately established. To address this gap, this study employed a combined methodology of differential scanning calorimetry (DSC) and cure index (CI) analysis to quantitatively assess crosslinking efficiency alongside structural and mechanical properties. Composites were reinforced by nylon mesh, aluminum foil, polyethylene, and jute fiber at ER:H ratios of 8:2 and 7:3. DSC revealed that ER + aluminum (7:3) achieved the highest enthalpy (1049.3 J g −1 ), representing a ~52% increase relative to unreinforced epoxy (695 J g −1 ). CI evaluation confirmed that this formulation attained an “excellent” cure classification, while polymeric and natural reinforcements exhibited poor cure quality. Mechanical testing showed that the elastic modulus improved to 24.1 GPa for ER + aluminum (ER:H = 7:3), and hardness increased by ~22% over epoxy. Furthermore, water absorption resistance was dramatically improved by the reinforcement of aluminum and jute at ER:H = 7:3, showing negligible uptake (< 0.1%). Overall, the integration of DSC and CI provides a rigorous framework to link curing dynamics with multifunctional performance, demonstrating that optimizing the ER:H ratio and reinforcement selection, particularly with aluminum, yields highly cross‐linked, mechanically robust, and moisture‐resistant composites suitable for demanding structural applications.

Cite

APA

Rupam, M. N. A. M., Alam, M. J., Molla, M. H., Mim, J. A., Haque, M. E., Hossain, M. S., Hossain, M. D., & Hasan, M. R. (2026). Effect of Reinforcement Type and Epoxy‐to‐Hardener Ratio on the Curing Quality and Mechanical Properties of Epoxy Composites. Journal of Applied Polymer Science, 143(4). https://doi.org/10.1002/app.58109

Vancouver

Rupam MNAM, Alam MJ, Molla MH, Mim JA, Haque ME, Hossain MS, et al. Effect of Reinforcement Type and Epoxy‐to‐Hardener Ratio on the Curing Quality and Mechanical Properties of Epoxy Composites. Journal of Applied Polymer Science. 2026;143(4). doi:10.1002/app.58109

BibTeX
@article{Rupam2026,
  author = {Rupam, M. N. A. Mazumder and Alam, Md. Jahangir and Molla, Mahbub Hossen and Mim, Jannat Ara and Haque, Md. Ehasanul and Hossain, Md. Sarowar and Hossain, M. D. and Hasan, Md Razibul},
  title = {Effect of Reinforcement Type and Epoxy‐to‐Hardener Ratio on the Curing Quality and Mechanical Properties of Epoxy Composites},
  journal = {Journal of Applied Polymer Science},
  year = {2026},
  volume = {143},
  number = {4},
  doi = {10.1002/app.58109}
}
Start for free →