EUVIMEDOpdag EUVIMED
Crossref

Electropolymerization of Polypyrrole for the Fabrication of Ion Exchange Membranes in Water Treatment Applications

María C. Otálora Trujillo, A. K. N. Vargas, Rubén Camargo‐Amado

Journal of Applied Polymer Science · 2025-11-05 · 142 (41)

DOI: 10.1002/app.57588 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2025-07-09. Written by María C. Otálora Trujillo and 2 co-authors. Cited 3 times so far (Crossref); 41 references. Funded by: Universidad del Valle.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

The development of efficient ion exchange membranes supports water treatment technologies by enabling local manufacturing and lowering operational costs. Conductive polymers like polypyrrole (PPy) are promising due to their electrochemical activity and surface properties. This study investigates the electropolymerization of pyrrole on stainless steel mesh using two electrolyte systems: nonaqueous (LiClO 4 /acetonitrile) and aqueous (Na 2 SO 4 /deionized water). Pyrrole (0.2 M) and salts (0.1 M) were polymerized potentiostatically at 0.8 V versus Ag/AgCl for different deposition times. Increasing the synthesis time from 1800 s to 3600 s led to thicker films, regardless of the medium. Characterization by SEM/EDS, BET, and cyclic voltammetry showed that PPy‐nonaqueous had greater uniformity, conductivity, and redox activity compared to PPy‐aqueous, which exhibited irregular morphology and poor stability. BET analysis indicated a higher surface area and stronger adsorbate interactions for films PPy‐nonaqueous. Electrodialysis performance was tested by replacing commercial anion‐exchange membranes with PPy films. PPy‐nonaqueous achieved 77% of the ionic flux and 78% of the separation efficiency of the commercial membrane, while PPy‐aqueous showed only 0.52 mg/s·m 2 and 0.09%. These results highlight the critical influence of polymerization medium and time, demonstrating that acetonitrile‐based electropolymerization enables the fabrication of effective heterogeneous PPy membranes for ion separation in water treatment.

Funding

  • Universidad del Valle

Cite

APA

Trujillo, M. C. O., Vargas, A. K. N., & Camargo‐Amado, R. (2025). Electropolymerization of Polypyrrole for the Fabrication of Ion Exchange Membranes in Water Treatment Applications. Journal of Applied Polymer Science, 142(41). https://doi.org/10.1002/app.57588

Vancouver

Trujillo MCO, Vargas AKN, Camargo‐Amado R. Electropolymerization of Polypyrrole for the Fabrication of Ion Exchange Membranes in Water Treatment Applications. Journal of Applied Polymer Science. 2025;142(41). doi:10.1002/app.57588

BibTeX
@article{Trujillo2025,
  author = {Trujillo, María C. Otálora and Vargas, A. K. N. and Camargo‐Amado, Rubén},
  title = {Electropolymerization of Polypyrrole for the Fabrication of Ion Exchange Membranes in Water Treatment Applications},
  journal = {Journal of Applied Polymer Science},
  year = {2025},
  volume = {142},
  number = {41},
  doi = {10.1002/app.57588}
}
Start for free →