EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

Prediction of Tribological Properties of PC ‐ PBT / GNP ‐ MWCNT Nanocomposites Using Machine Learning Models

Tuba Özdemir ÖGE, Mecit ÖGE

Journal of Applied Polymer Science · 2025-05-10 · 142 (18)

DOI: 10.1002/app.56834 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2025-02-08. Written by Tuba Özdemir ÖGE and 1 co-authors. Cited 7 times so far (Crossref); 35 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study investigates the effect of the incorporation of multi‐walled carbon nanotubes (MWCNTs) and graphene nanoplatelets (GNPs) in polycarbonate‐poly(butylene terephthalate) (PC‐PBT) blends on the mechanical and tribological blend properties. PC‐PBT/GNP‐MWCNT nanocomposites were synthesized via melt‐compounding with various filler loadings (0.5, 1, 3, 5, and 7 wt.%). SEM analyses revealed adequate dispersion and strong interaction between the nano‐fillers and the polymer matrix. Mechanical testing demonstrated up to ~16%, ~38%, and ~9% improvement in tensile modulus, bending modulus, and impact strength, respectively, with the optimum nano‐filler fraction of 0.5 wt. %. Tribological assessments, conducted using a pin‐on‐disc apparatus, showed marked reductions in specific wear rates (SWRs) reaching ~87% at the optimal filler loading of 0.5 wt.%. The mechanical behavior of the nanocomposites was found to depend primarily on dispersion state, whereas tribological properties were found to be dictated by a transfer film formation mechanism facilitated by filler addition. The experimental results were corroborated by a Random Forest machine learning model yielding the highest accuracy with R 2 = 0.94 for tensile modulus estimations and R 2 = 0.82 for SWR estimations under a 10 N load.

Funding

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu

Cite

APA

ÖGE, T. Ö., & ÖGE, M. (2025). Prediction of Tribological Properties of PC ‐ PBT / GNP ‐ MWCNT Nanocomposites Using Machine Learning Models. Journal of Applied Polymer Science, 142(18). https://doi.org/10.1002/app.56834

Vancouver

ÖGE TÖ, ÖGE M. Prediction of Tribological Properties of PC ‐ PBT / GNP ‐ MWCNT Nanocomposites Using Machine Learning Models. Journal of Applied Polymer Science. 2025;142(18). doi:10.1002/app.56834

BibTeX
@article{GE2025,
  author = {ÖGE, Tuba Özdemir and ÖGE, Mecit},
  title = {Prediction of Tribological Properties of PC ‐ PBT / GNP ‐ MWCNT Nanocomposites Using Machine Learning Models},
  journal = {Journal of Applied Polymer Science},
  year = {2025},
  volume = {142},
  number = {18},
  doi = {10.1002/app.56834}
}
Start for free →