EUVIMEDObjevte EUVIMED
Crossref

Characterization of biodegradable bi‐layer films from thermoplastic starch and poly‐ l ‐lactic acid

Mahmut Ekrem Parlak, Kubra Uzuner, Sebahat Ozdemir, Fatma Tuba Kirac Demirel, Ayse Neslihan Dundar, Oya Irmak Sahin, Adnan Fatih Dagdelen, Halil Ibrahim Odabas, Furkan Turker Saricaoglu

Journal of Applied Polymer Science · 2024-05-20 · 141 (20)

DOI: 10.1002/app.55378 ↗

At a glance

Journal article in Journal of Applied Polymer Science, 2024-03. Written by Mahmut Ekrem Parlak and 8 co-authors. Cited 10 times so far (Crossref); 49 references.

AbstraktBibliografické údajeCiteRelated studies

Abstract (original language)

This study aimed to enhance the oxygen barrier properties of polylactic acid (PLA) film, a biodegradable packaging material with high oxygen permeability (OP). Bi‐layer films were produced by coating thermoplastic starch (TPS) onto PLA films in various ratios while maintaining constant film thickness. The mechanical, optical, barrier, thermal, hydrophobicity, moisture sorption, and microstructural properties of the films were analyzed. Increasing the TPS ratio elevated moisture content (MC), water uptake, solubility, and opacity while enhancing UV barrier properties. TPS coating reduced tensile and burst strength but increased the burst deformation of the bi‐layer films. Bi‐layer film production resulted in a water vapor permeability increase of 59.26%–94.44% compared with neat PLA while decreasing OP by 2.52%–29.66%. The equilibrium moisture content (EMC) rose with higher TPS ratios, displaying type II isotherms. FTIR analysis indicated no chemical interactions between PLA and TPS. Increasing the TPS ratio decreased PLA crystallinity, supporting the mechanical and barrier properties of the bi‐layer films. Neat and bi‐layer films exhibited smooth, homogeneous surfaces, with a visible interface in the cross‐section of the bi‐layer films. In conclusion, TPS shows promise as an alternative to improve oxygen barrier properties in PLA films without adversely affecting other properties.

Cite

APA

Parlak, M. E., Uzuner, K., Ozdemir, S., Demirel, F. T. K., Dundar, A. N., Sahin, O. I., Dagdelen, A. F., Odabas, H. I., & Saricaoglu, F. T. (2024). Characterization of biodegradable bi‐layer films from thermoplastic starch and poly‐ l ‐lactic acid. Journal of Applied Polymer Science, 141(20). https://doi.org/10.1002/app.55378

Vancouver

Parlak ME, Uzuner K, Ozdemir S, Demirel FTK, Dundar AN, Sahin OI, et al. Characterization of biodegradable bi‐layer films from thermoplastic starch and poly‐ l ‐lactic acid. Journal of Applied Polymer Science. 2024;141(20). doi:10.1002/app.55378

BibTeX
@article{Parlak2024,
  author = {Parlak, Mahmut Ekrem and Uzuner, Kubra and Ozdemir, Sebahat and Demirel, Fatma Tuba Kirac and Dundar, Ayse Neslihan and Sahin, Oya Irmak and Dagdelen, Adnan Fatih and Odabas, Halil Ibrahim and Saricaoglu, Furkan Turker},
  title = {Characterization of biodegradable bi‐layer films from thermoplastic starch and poly‐ l ‐lactic acid},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {20},
  doi = {10.1002/app.55378}
}
Start for free →