EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Enhanced mechanical properties of epoxy composites using cellulose micro‐ and nano‐crystals

Patricia Semaan, Abraham Zahran, Inge Schlapp‐Hackl, Ali R. Tehrani‐Bagha, Samir Mustapha

Journal of Applied Polymer Science · 2024-04-10 · 141 (14)

DOI: 10.1002/app.55180 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2024-01-17. Written by Patricia Semaan and 4 co-authors. Cited 21 times so far (Crossref); 48 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Epoxy polymers are commonly utilized in structural applications due to their high bearing capacity and excellent chemical resistance. However, their inherent brittleness poses a significant challenge for their use in high shock and fracture strength products. To address this shortcoming, fillers can be incorporated into the polymer during preparation. In this study, we aimed to investigate the effect of incorporating cellulose‐based fillers, namely cellulose nanocrystals (CNCs) and microcrystalline cellulose (MCC), on the mechanical properties of epoxy polymer composites. The study evaluated the impact of various factors, including filler concentration, particle size, and moisture content, on the mechanical properties of the composites. The results demonstrated that the incorporation of CNC or MCC powders at concentrations below 5% could enhance the mechanical properties of the resulting epoxy composites without adversely affecting their surface and thermal properties. The maximum tensile strength and fracture toughness of the filler‐based epoxy composites were achieved at 2 and 4 wt% for CNCs and MCC, respectively. CNCs with a smaller particle size distribution were found to be much more effective than MCC in improving the mechanical properties of the epoxy composites. Furthermore, utilizing dried fillers resulted in a higher improvement in tensile strength, which was achieved at lower filler concentrations.

Cite

APA

Semaan, P., Zahran, A., Schlapp‐Hackl, I., Tehrani‐Bagha, A. R., & Mustapha, S. (2024). Enhanced mechanical properties of epoxy composites using cellulose micro‐ and nano‐crystals. Journal of Applied Polymer Science, 141(14). https://doi.org/10.1002/app.55180

Vancouver

Semaan P, Zahran A, Schlapp‐Hackl I, Tehrani‐Bagha AR, Mustapha S. Enhanced mechanical properties of epoxy composites using cellulose micro‐ and nano‐crystals. Journal of Applied Polymer Science. 2024;141(14). doi:10.1002/app.55180

BibTeX
@article{Semaan2024,
  author = {Semaan, Patricia and Zahran, Abraham and Schlapp‐Hackl, Inge and Tehrani‐Bagha, Ali R. and Mustapha, Samir},
  title = {Enhanced mechanical properties of epoxy composites using cellulose micro‐ and nano‐crystals},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {14},
  doi = {10.1002/app.55180}
}
Start for free →