EUVIMEDSkopri EUVIMED
Crossref

Quest for high performance carbon capture membranes: Fabrication of SAPO ‐34 and CNTs ‐doped polyethersulfone‐based mixed‐matrix membranes

Sidra Nawaz, Muhammad Sarfraz, Asif Ali Qaiser, Muneerah Alomar, Soumaya Gouadria, Amal Ali BaQais

Journal of Applied Polymer Science · 2024-02-20 · 141 (8)

DOI: 10.1002/app.54971 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2023-11-30. Written by Sidra Nawaz and 5 co-authors. Cited 9 times so far (Crossref); 18 references. Funded by: Higher Education Commision, Pakistan.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Gas separation process is an effective method for capturing and removing CO 2 from post‐combustion flue gases. Due to their various essential properties such as ability to improve process efficiency, polymeric membranes are known to dominate the market. Trade‐off between gas permeability and selectivity through membranes limits their separation performance. In this study, solution casting cum phase separation method was utilized to create polyethersulfone‐based composite membranes doped with carbon nanotubes (CNTs) and silico aluminophosphate (SAPO‐34) as nanofiller materials. Membrane properties were then examined by performing gas permeation test, chemical structural analysis and optical microscopy. While enhancing membranes CO 2 permeance, SAPO‐34 and CNTs mixture improved their CO 2 /N 2 selectivity. By carefully adjusting membrane casting factors such as filler loadings. Using Taguchi statistical analysis, their carbon capture efficiency was improved. The improved mixed‐matrix membrane with loading of 5 wt% CNTs and 10 wt% SAPO‐34 in PES showed highly promising separation performance with a CO 2 permeability of 319 Barrer and an ideal CO 2 /N 2 selectivity of 12, both of which are within the 2008 Robeson upper bound. A better mixed‐matrix membrane with outstanding CO 2 /N 2 selectivity and CO 2 permeability was produced as a result of the synergistic effect of adding two types of fillers in optimized loading.

Funding

  • Higher Education Commision, Pakistan

Cite

APA

Nawaz, S., Sarfraz, M., Qaiser, A. A., Alomar, M., Gouadria, S., & BaQais, A. A. (2024). Quest for high performance carbon capture membranes: Fabrication of SAPO ‐34 and CNTs ‐doped polyethersulfone‐based mixed‐matrix membranes. Journal of Applied Polymer Science, 141(8). https://doi.org/10.1002/app.54971

Vancouver

Nawaz S, Sarfraz M, Qaiser AA, Alomar M, Gouadria S, BaQais AA. Quest for high performance carbon capture membranes: Fabrication of SAPO ‐34 and CNTs ‐doped polyethersulfone‐based mixed‐matrix membranes. Journal of Applied Polymer Science. 2024;141(8). doi:10.1002/app.54971

BibTeX
@article{Nawaz2024,
  author = {Nawaz, Sidra and Sarfraz, Muhammad and Qaiser, Asif Ali and Alomar, Muneerah and Gouadria, Soumaya and BaQais, Amal Ali},
  title = {Quest for high performance carbon capture membranes: Fabrication of SAPO ‐34 and CNTs ‐doped polyethersulfone‐based mixed‐matrix membranes},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {8},
  doi = {10.1002/app.54971}
}
Start for free →