EUVIMEDOpdag EUVIMED
Crossref

Enhanced desalination performance and arsenate removal using semi‐aromatic polyamide‐based pervaporation membranes by modifying with amino‐acids via interfacial polymerization

Xuan Minh Pham, Nguyen Thi Nguyen, Thang Van Bui, Nhu Huynh Thi Nguyen, Thao Minh Nguyen, Pha Ngoc Bui, Ngoc Nhu Thi Nguyen, Mai Thanh Phong, Van‐Huy Nguyen, Le‐Hai Tran

Journal of Applied Polymer Science · 2024-01-05 · 141 (1)

DOI: 10.1002/app.54749 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2023-10-03. Written by Xuan Minh Pham and 9 co-authors. Cited 11 times so far (Crossref); 44 references. Funded by: Dong Thap University.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

In this study, the semi‐aromatic polyamide membranes were synthesized by the interfacial polymerization between piperazine (PIP) monomers in the water phase and Benzene‐1,3,5‐tricarbonyl chloride in the organic phase. To further modify the semi‐aromatic pervaporation membrane, the two amino acids, glycine, and l ‐lysine, were mixed with PIP monomers for interfacial polymerization. The morphology and physicochemical properties of the synthesized membranes were analyzed using Fourier transform infrared (FTIR), field emission scanning electron microscope (FE‐SEM), atomic force microscope (AFM), and contact angle measurements. The results show that the semi‐aromatic polyamide membranes modified by the two amino acids possess a higher hydrophilic surface and lower thickness compared to the unmodified membrane. Additionally, the permeation flux of the semi‐aromatic polyamide membranes was improved by 18.6% and 38.5% as modified with glycine and l ‐lysine, respectively, at the operating temperature of 70°C when the rejection of both NaCl and arsenic are higher than 99.8%. Furthermore, the operating temperature significantly influenced the permeation flux, while the salt rejections were insignificantly affected. The permeation flux increases by 3.2‐ and 4.0‐folds for glycine and lysine‐modified membranes, respectively, when elevating the feed temperature from 40°C to 70°C. The highest permeation flux of 29.5 kg m −2 h −1 with a 5 wt% NaCl rejection of 99.8% was obtained at 70°C by using 0.3 wt% l ‐lysine modified polyamide (PA) membrane. For elimination of 1.5 mg L −1 As solution at the feed temperature of 70°C, such l ‐lysine modified PA membrane exhibited the permeation flux of 30.5 kg m −2 h −1 and As rejection of 99.6%, respectively. This work provides a cost‐saving, facile, and eco‐friendly preparation method for effectively improving the permeation flux while not sacrificing the high rejection of salts of the modified membranes.

Funding

  • Dong Thap University

Cite

APA

Pham, X. M., Nguyen, N. T., Bui, T. V., Nguyen, N. H. T., Nguyen, T. M., Bui, P. N., Nguyen, N. N. T., Phong, M. T., Nguyen, V., & Tran, L. (2024). Enhanced desalination performance and arsenate removal using semi‐aromatic polyamide‐based pervaporation membranes by modifying with amino‐acids via interfacial polymerization. Journal of Applied Polymer Science, 141(1). https://doi.org/10.1002/app.54749

Vancouver

Pham XM, Nguyen NT, Bui TV, Nguyen NHT, Nguyen TM, Bui PN, et al. Enhanced desalination performance and arsenate removal using semi‐aromatic polyamide‐based pervaporation membranes by modifying with amino‐acids via interfacial polymerization. Journal of Applied Polymer Science. 2024;141(1). doi:10.1002/app.54749

BibTeX
@article{Pham2024,
  author = {Pham, Xuan Minh and Nguyen, Nguyen Thi and Bui, Thang Van and Nguyen, Nhu Huynh Thi and Nguyen, Thao Minh and Bui, Pha Ngoc and Nguyen, Ngoc Nhu Thi and Phong, Mai Thanh and Nguyen, Van‐Huy and Tran, Le‐Hai},
  title = {Enhanced desalination performance and arsenate removal using semi‐aromatic polyamide‐based pervaporation membranes by modifying with amino‐acids via interfacial polymerization},
  journal = {Journal of Applied Polymer Science},
  year = {2024},
  volume = {141},
  number = {1},
  doi = {10.1002/app.54749}
}
Start for free →