EUVIMEDScopri EUVIMED
Crossref

Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors

Michaela Pavličková, Slađana Đurđić, Michal Hatala, Dalibor Stanković, Ľubomír Švorc, Peter Veteška, Pavol Gemeiner

Journal of Applied Polymer Science · 2023-11-10 · 140 (42)

DOI: 10.1002/app.54570 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2023-08-17. Written by Michaela Pavličková and 6 co-authors. Cited 7 times so far (Crossref); 54 references. Funded by: Agentúra na Podporu Výskumu a Vývoja, Slovak Academic Information Agency, Slovenská technická univerzita v Bratislave.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

Pad printing is not a widely used printing technique, but it offers the possibility of a simple, fast, and low‐cost production of various high‐resolution electrode structures. Here, the pad‐printed reduced graphene oxide (rGO) electrodes are prepared from pad‐printable inks containing rGO powder and different concentrations of two cellulose‐based polymers: ethylcellulose and cellulose acetate butyrate. The applicability of rGO inks for pad printing is analyzed according to their rheological parameters and printability. Based on viscosity, storage ( G′ ) and loss modulus ( G″ ) values, 10 wt% of ethylcellulose and 15 wt% of cellulose acetate butyrate appear to be most suitable for pad printing. The effect of polymer concentration on rGO electrodes homogeneity and mechanical stability is also evaluated. Cyclic voltammetry measurements for [Fe(CN) 6 ] 3−/4− redox system are performed with rGO/cellulose inks pad‐printed onto transparent conductive oxide substrates with the best results when using ethylcellulose as a binder. Finally, the square‐wave voltammetric method assesses the viability of rGO electrodes for the fast detection of ascorbic acid (detection limit of 15 μM) coupled with satisfactory precision (4.5%, n = 5) and long‐term stability during electrochemical measurements.

Funding

  • Agentúra na Podporu Výskumu a Vývoja
  • Slovak Academic Information Agency
  • Slovenská technická univerzita v Bratislave
  • Vedecká Grantová Agentúra MŠVVaŠ SR a SAV

Cite

APA

Pavličková, M., Đurđić, S., Hatala, M., Stanković, D., Švorc, Ľ., Veteška, P., & Gemeiner, P. (2023). Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors. Journal of Applied Polymer Science, 140(42). https://doi.org/10.1002/app.54570

Vancouver

Pavličková M, Đurđić S, Hatala M, Stanković D, Švorc Ľ, Veteška P, et al. Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors. Journal of Applied Polymer Science. 2023;140(42). doi:10.1002/app.54570

BibTeX
@article{Pavlikov2023,
  author = {Pavličková, Michaela and Đurđić, Slađana and Hatala, Michal and Stanković, Dalibor and Švorc, Ľubomír and Veteška, Peter and Gemeiner, Pavol},
  title = {Pad printing inks based on reduced graphene oxide and various cellulose binders: Rheological properties, printability and application in electrochemical sensors},
  journal = {Journal of Applied Polymer Science},
  year = {2023},
  volume = {140},
  number = {42},
  doi = {10.1002/app.54570}
}
Start for free →