EUVIMEDScopri EUVIMED
Crossref

Investigation of mechanical, thermal, and wear‐resistant properties of PDMS nanocomposites filled with low loading of 2D MoS 2

Leilei Wang, Jungwook Choi

Journal of Applied Polymer Science · 2023-10-20 · 140 (40) · 1-11

DOI: 10.1002/app.54508 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2023-08-03. Written by Leilei Wang and 1 co-authors. Cited 4 times so far (Crossref); 87 references. Funded by: Ministry of Science and ICT, South Korea.

AbstractDati bibliograficiCiteRelated studies

Abstract (original language)

This study investigates the properties of polydimethylsiloxane (PDMS)‐based nanocomposites with different loadings of two‐dimensional molybdenum disulfide (MoS 2 ) nanosheets. The uniform incorporation of the MoS 2 nanosheets in the PDMS matrix was confirmed by unique excitonic absorption peaks, Raman signatures, and x‐ray photoelectron spectra of the MoS 2 . Owing to the excellent mechanical properties of the embedded MoS 2 nanosheets, the elastic modulus and tensile strength of PDMS respectively increased to 42.86% and 19.63% compared to that of pristine PDMS, even at a low MoS 2 loading of 0.04 wt%. A dynamic mechanical analysis of the nanocomposites revealed an increase in the storage modulus of PDMS by 9.83% and 30.88% with 0.04 wt% MoS 2 loading at strain and frequency sweeps from 0% to 1% and 0.01–10 Hz, respectively. The low MoS 2 loading also increased degradation temperature for 50% weight loss from 575.76 (for PDMS) to 652.74°C (for MoS 2 ‐PDMS). In addition, ball‐on‐disk tribology tests revealed that the incorporation of MoS 2 nanosheets withstand higher angular speeds (up to 15.71 rad/s) and significantly reduced the friction coefficient by 39.69% (at 7.85 rad/s). Our results imply that MoS 2 ‐PDMS nanocomposites could potentially be used in various applications that require dielectric properties with improved mechanical and thermal stability.

Funding

  • Ministry of Science and ICT, South Korea

Cite

APA

Wang, L., & Choi, J. (2023). Investigation of mechanical, thermal, and wear‐resistant properties of PDMS nanocomposites filled with low loading of 2D MoS 2. Journal of Applied Polymer Science, 140(40), 1-11. https://doi.org/10.1002/app.54508

Vancouver

Wang L, Choi J. Investigation of mechanical, thermal, and wear‐resistant properties of PDMS nanocomposites filled with low loading of 2D MoS 2. Journal of Applied Polymer Science. 2023;140(40):1-11. doi:10.1002/app.54508

BibTeX
@article{Wang2023,
  author = {Wang, Leilei and Choi, Jungwook},
  title = {Investigation of mechanical, thermal, and wear‐resistant properties of PDMS nanocomposites filled with low loading of 2D MoS 2},
  journal = {Journal of Applied Polymer Science},
  year = {2023},
  volume = {140},
  number = {40},
  pages = {1--11},
  doi = {10.1002/app.54508}
}
Start for free →