Experimental study on the plugging and profile control of preformed particle gels in high temperature and salinity reservoir
Journal of Applied Polymer Science · 2023-08-20 · 140 (32)
DOI: 10.1002/app.54247 ↗At a glance
Journal article in Journal of Applied Polymer Science, published online on 2023-05-31. Written by Huancai Fan and 6 co-authors. Cited 15 times so far (Crossref); 40 references.
Abstract (original language)
A novel modified polysaccharide composite preformed particle gel (MCPG) was synthesized as a profile control agent to improve the situation of high water cut and low oil recovery. Then, the structure of MCPG was characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), and environmental scanning electron microscope (ESEM). Subsequently, the impact of MCPG on enhanced oil recovery was investigated through nuclear magnetic resonance (NMR) and core displacement experiments. The results of FTIR, XRD, and ESEM indicate that monomers have been successfully intercalated into the layered structure of nanoscale sodium bentonite. In the condition of 130°C and salinity of 240,000 mg/L, the value of the swelling ratio and the toughness factor can reach about 30 and 0.87, respectively. The results of nonlinear fitting indicate that the relationship between the resistance coefficient and residual resistance coefficient with the matching coefficient ( β ) followed a power function, while the blocking water efficiency with β followed an exponential function. When the permeability ratio was as high as 30.58, MCPG still exhibited excellent profile improvement performance. NMR experiments proved that MCPG increased the displacement resistance in large pores and effectively enhanced the displacement efficiency in medium pores and small pores. The oil displacement efficiency in MCPG flooding and subsequent water flooding stages increased by 18.65% and 8.42%, respectively.
Cite
APA
Fan, H., Pu, W., Du, D., Xu, M., Chen, L., Xu, L., & Jin, F. (2023). Experimental study on the plugging and profile control of preformed particle gels in high temperature and salinity reservoir. Journal of Applied Polymer Science, 140(32). https://doi.org/10.1002/app.54247
Vancouver
Fan H, Pu W, Du D, Xu M, Chen L, Xu L, et al. Experimental study on the plugging and profile control of preformed particle gels in high temperature and salinity reservoir. Journal of Applied Polymer Science. 2023;140(32). doi:10.1002/app.54247
BibTeX
@article{Fan2023,
author = {Fan, Huancai and Pu, Wanfen and Du, Daijun and Xu, Mengsheng and Chen, Lan and Xu, Liang and Jin, Fayang},
title = {Experimental study on the plugging and profile control of preformed particle gels in high temperature and salinity reservoir},
journal = {Journal of Applied Polymer Science},
year = {2023},
volume = {140},
number = {32},
doi = {10.1002/app.54247}
}
EUVIMED