EUVIMEDSkopri EUVIMED
Crossref

Preparation and evaluation of acryloyl morpholine modified emulsion fracturing fluid thickener with high temperature resistance and salt resistance

Shenglong Shi, Jinsheng Sun, Kaihe Lv, Qingzhi Wen, Yingrui Bai, Jintang Wang, Jiafeng Jin, Jingping Liu, Xianbin Huang, Jian Li

Journal of Applied Polymer Science · 2023-01-15 · 140 (3)

DOI: 10.1002/app.53338 ↗

At a glance

Journal article in Journal of Applied Polymer Science, published online on 2022-11-17. Written by Shenglong Shi and 9 co-authors. Cited 21 times so far (Crossref); 42 references. Funded by: Key Technology Research and Development Program of Shandong.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

To prepare the thickener of fracturing fluid with temperature resistance, salt resistance and quick dissolution, an emulsion thickener (ASC) was synthesized by acrylamide, acrylic acid, 2‐acrylamide‐2‐methylpropanesulfonic acid, and acryloyl morpholine. The dissolution, salt resistance and drag reduction of ASC, and the viscoelasticity, temperature resistance and shear resistance and gel breaking properties of fracturing fluid formed by ASC and zirconium crosslinker were investigated. The results showed that the sticky time of ASC was less than 60 s and the drag reduction rate was 72.5% in 100,000 mg/L brine, showing that ASC had thickening ability in high salinity brine and satisfied the requirements of continuous fluid preparation on the fracturing process. The viscosity of ASC fracturing fluid was 98 mPa s after shearing at 200°C and 170 s −1 for 150 min when the salinity was 100,000 mg/L. When the ammonium persulfate concentration was 400 mg/L, the viscosity of the broken fluid was 4.0 mPa s. The temperature resistance, salt resistance and shear resistance of ASC emulsion fracturing fluid could be significantly improved by the introduction of acryloyl morpholine, ASC fracturing fluid had the characteristics of high elasticity and low viscosity, which could meet the application requirements under ultra‐high temperature reservoirs.

Funding

  • Key Technology Research and Development Program of Shandong

Cite

APA

Shi, S., Sun, J., Lv, K., Wen, Q., Bai, Y., Wang, J., Jin, J., Liu, J., Huang, X., & Li, J. (2023). Preparation and evaluation of acryloyl morpholine modified emulsion fracturing fluid thickener with high temperature resistance and salt resistance. Journal of Applied Polymer Science, 140(3). https://doi.org/10.1002/app.53338

Vancouver

Shi S, Sun J, Lv K, Wen Q, Bai Y, Wang J, et al. Preparation and evaluation of acryloyl morpholine modified emulsion fracturing fluid thickener with high temperature resistance and salt resistance. Journal of Applied Polymer Science. 2023;140(3). doi:10.1002/app.53338

BibTeX
@article{Shi2023,
  author = {Shi, Shenglong and Sun, Jinsheng and Lv, Kaihe and Wen, Qingzhi and Bai, Yingrui and Wang, Jintang and Jin, Jiafeng and Liu, Jingping and Huang, Xianbin and Li, Jian},
  title = {Preparation and evaluation of acryloyl morpholine modified emulsion fracturing fluid thickener with high temperature resistance and salt resistance},
  journal = {Journal of Applied Polymer Science},
  year = {2023},
  volume = {140},
  number = {3},
  doi = {10.1002/app.53338}
}
Start for free →